The complete contents of the Service Provider Directory are provided below. EPA has created this directory to share information on service and technology providers that can facilitate methane emission reduction activities. 

This page provides links to non-EPA web sites. You will leave the EPA.gov domain and enter another page with more information. EPA cannot attest to the accuracy of information on that non-EPA page. Providing links to a non-EPA Web site is not an endorsement of the other site or the information it contains by EPA or any of its employees. Also, be aware that the privacy protection provided on the EPA.gov domain (see Privacy and Security Notice) may not be available at the external link. The following links exit the site Exit

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  Z 

- A -

Aavolyn Corp.

Lynn Farrell (lynnfarrell@aavolyn.com)
616 Orange St. POB 1097, Millville, NJ 08332, USA
(856) 327-8040 (Phone)
(856) 327-9595 (Fax)
http://www.aavolyn.com/index.html

Recip compressor rod packing, rings, and packing cases. Emmissions packing seals, pressure balanced rings.

---

ABUTEC - Advanced Burner Technologies

Andy Smith (andy.smith@abutec.com)
333 Creekstone Ridge, Suite 310, Woodstock, GA 30188, USA
(770) 846-0155 (Phone)
http://abutec.com/

ABUTEC is an international leader in providing low emission, high efficiency, flares and burner systems. We are proven in the biogas industry, oil & gas industry, and petrochemical markets. Our Low Emission Flare system offers the industries lowest emissions at 99.99% destruction efficiency and less than 15ppm NOx and 10 ppm CO. Visit www.abutec.com to learn more!

---

ACOI, Inc.

Alice Xiao (alice@acoi.us)
6046 Cornerstone Court West, Suite 200, San Diego, CA 92121, USA
(858) 537-0838 (Phone)
(858) 678-0888 (Fax)
http://www.acoi.us/

ACOI, Inc. service focuses on feasibility study of North American clean-energy technology for Asian enterprises in oil and gas sector. Other services such as exhibit and technology promotion, equipment application testing, engineering design coordination, on-site trial commissioning and after-sale support etc. Our feasibility study includes organizing site visit overseas, technical lecture/exchange, marketing analysis, feasibility repot etc. ACOI, Inc. becomes a highly reliable and convincible player in cross cultural communication in oil and gas industries.

---

Altec Emissions Monitoring Services

Jill Thoerle (jthoerle@alteceg.com)
520 Post Oak Blvd, Suite 260, Houston, TX 77027
(713) 574 2240 (Phone)
www.altecems.com/

Altec EMS assists oil and gas operators in complying with fugitive methane emissions regulations. We provide consulting, leak monitoring and detection, and repair services. We use state of the art equipment for periodic and permanent solutions. The results are faster, more reliable, complete leak detection combined with compliant reporting.

---

Amine Experts Inc.

Jamie Swallow (jamie.swallow@sulphurexperts.com)
12 Manning Close N.E, Calgary, Alberta T2E 7N6, Canada
(281) 229-5054 (Phone)
http://www.amineexperts.com

Amine Experts, a division of Sulphur Experts Inc., offers expert process engineering and evaluation services to Amine processes at natural gas processing and oil refining facilities around the world. Created to complement the work of Sulphur Experts Inc., Amine Experts will specifically answer process problems in the amine sweetening unit and in tail gas clean-up units that use an amine plant. The group offers impartial, third party analytical services that have previously not been available in the amine plant, using specialized sampling and analytical techniques. Expert engineering evaluation of the test results then offers operating and design modifications that will improve operation of the amine unit.

---

Apogee Scientific Inc.

DJ Dorrington (djdorrington@apogee-sci.com)
2895 W Oxford Ave, Suite 1, Englewood, CO 80110-4397, USA
(805) 291-0712 (Phone)
(303) 783-9607 (Fax)
http://www.apogee-sci.com

Apogee Scientific provides services and system sales for detecting methane, total hydrocarbon, and CO2 leaks from pipelines, production/storage facilities, landfills, and coal seeps. The Leak Detection System, "LDS", has been fully commercialized in all facets of the Gas Industry with proven ground and airborne applications. The LDS is a rugged, advanced system that is highly sensitive, fast, and maximizes accuracy with no false positives. Leak locations are determined by GPS with advanced user-friendly software allowing for immediate processing of data and report generation.

---

Arkoma Well Analysis and Consulting, LLC

Donna Gentry (info@awac-llc.com)
111 N Morrill Street, Morrilton, AR 72110, USA
(501) 242-4482 (Phone)
(501) 242-4523 (Fax)
http://www.awac-llc.com

Environmental Consultants on efficient field operations and methane reduction in the petroleum industry. Our company has a strong sense of urgency regarding the negative impacts of methane and the environment. In addition to consulting, we develop and implement course material and training on natural gas emissions.

---

A.R.T. Airborne Natural Gas Leak Detection

Archie Taylor (ART@ARTgasleak.com)
Meacham Airport Hangar 10Bs, Fort Worth, TX 76106, USA
(817) 944-3226 (Phone)
http://www.ARTgasleak.com

Airborne Natural gas leak detection system uses a pulsed beam diode laser attached to a helicopter for fast, economical, and high quality solution to detect fugitive gas emissions. This is an industry best practice solution. We are in business to locate methane gas leaks as an independent verification source.

---

Auburn Environmental

Joe Matsko (joematsko@auburn-environmental.com)
24850 Aurora Road, Unit C&D, Cleveland, OH 44146, USA
(800) 218-1828 (Phone)
(440) 786-1945 (Fax)
http://www.auburn-environmental.com

Domestically or abroad, our experts make it possible to optimize and execute effective and efficient solutions for your assets. Auburn Environmental offers services and consulting related to Pipeline Integrity, Vapor Recovery, Leak Detection, NDT, Tank Services, Subpart W Emissions, Corrosion Monitoring, Landfill Cap/ Gas Capture Evaluations, Regulatory Compliance and EH&S. Currently providing services globally. Please feel welcome to contact Joe Matsko directly +1 440 590 6844 or our USA headquarters +1 440 786 1943.

---

Avanti Environmental

Kathleen O'Kelley (kokelley@avantienv.com)
2855 Michelle Dr., Ste. 230, Irvine, CA 92606, USA
(714) 730-3320 (Phone)
(714) 730-3315 (Fax)
http://www.avantienvironmental.com

Avanti specializes in Leak Detection and Repair (LDAR), Optical Imaging (Alternative Work Practice) and Tagging and Inventory (T&I) at Oil and Chemical processing and storage facilities onshore and offshore pursuant to District and EPA requirements. We have our own proprietary data management system for reporting, monitoring compliance and repairs, tracking leaks, repair actions and repair deadlines and maintaining accurate inventories.

---

Top of Page

- B -

Bekaert CEB Technologies

Timothy Egan (tim.egan@bekaert.com)
1000 Cobb Place Blvd., Kennesaw, GA 30144, USA
(770) 514-2208 (Phone)
http://www.bekaert.com

Bekaert's Clean Enclosed Burner (CEB) Technology is an ultra low emission flaring system. The CEB is able to achieve a destruction efficiency of up to 99.99%, while generating less than 15 ppm of NOx and less than 10 ppm of CO. Because of the stability of its proprietary premix surface combustion technology, the CEB can operate at 150 BTU/scf without the need for support gas. This makes the CEB ideal for waste gases with low calorific values. The CEB is ideal for load/unload, petrochemical, waste water treatment and landfill applications.

---

Benchmark Pipeline

Markus Orr (mmorr3@hotmail.com)
Acapulco, Acapulco 79707, Mexico
(432) 620-0102 (Phone)
(432) 687-4562 (Fax)

Benchmark Pipeline has developed a system (the GaSaver) to capture emissions from the tank battery for high gravity gas wells. We have introduced the system in Latin America.

---

Black Gold Valve Company LLC

Clinton Wills (clintonwills@gmail.com)
PO BOX 283, Princeton, CA 95970, USA
(530) 682-2378 (Phone)

All electric dump valve specialist.

---

Blair Air System

Jim Blair (info@blairair.com)
PO Box 208, Morrin, Alberta T0J 2B0, Canada
(403) 820-9715 (Phone)
(403) 772-3940 (Fax)
http://www.blairair.com

The Blair Air System is a zero emission mechanical device that is driven by small and intermittent differential pressure of a flowing gas line, and provides compressed air for instrumentation. There is no combustion or consumption of gas. The unit, which is contained on a small skid, is placed near a gas or oil well, or facility, and is connected 'in line' so that all fluids passing through it return to the pipeline. One, two, or three optional mechanical pumps fit neatly onto the machine to provide chemical injection at easily adjustable rates, or to move larger volumes of liquids such as produced water.

---

Boreal Laser Inc.

John Selby (jselby@boreal-laser.com)
#13, 51127 RR 255, Spruce Grove, Alberta T7Y 1A8, Canada
(403) 618-7544 (Phone)
(780) 987-2418 (Fax)
http://www.boreal-laser.com

Boreal Laser manufactures laser based gas detection equipment. Applications include aerial and terrestrial based leak detection, fence-line monitoring and processing and storage unit monitoring. The equipment is self calibrating, requires no consumables and is very robust.

---

BTGap, L.L.C.

Brian Boyer (brianeboyer@gmail.com)
100 Kirk Dale Circle, Lafayette, LA, 70508, USA
(337) 356-9856 (Phone)
(337) 356-9856 (Fax)
http://www.btgap.us/

Environmental consulting services to oil and gas industry including emission inventories, air permitting and compliance.

---

Top of Page

- C -

Calscan Solutions

Henry Tessier (htessier@calscan.net)
23274 Pine Shadows Lane, Porter, TX 77365, USA
(281) 354-1236 (Phone)
http://www.calscan.net

Manufacturer of vent gas measurement equipment, Zero Emission Electric Control System and cyclone separators.

---

Cameron-Cole, LLC

John Rector (jrector@cameron-cole.com)
5777 Central Avenue, Suite 200, Boulder, CO 80301, USA
(303) 938-5550 (Phone)
http://www.cameron-cole.com

We advise and assist our clients with climate change policy development; carbon footprint analysis; GHG inventory design, development, implementation, documentation and optimization; verification or certification of GHG emissions inventories to best practice or programmatic requirements; alignment of GHG management with overall business strategy; GHG emissions reduction and carbon-neutral strategies; emissions reductions credits, renewable energy certificates and potential trading opportunities; and public reporting and communication of climate-related issues and GHG-related performance.

---

CenterPoint Energy

James Hulse (j.hulse@centerpointenergy.com)
1111 Louisiana , Houston, TX, 77002, USA
(832) 570-7517 (Phone)
(713) 207-9493 (Fax)
http://www.centerpointenergy.com/mes

We have more than 20 years in the business of safely, reliably providing CNG and/or LNG for piepline supprt. We are the "Turn Key" provider of full scale Mobile Natural Gas supply. We have a large fleet of equipment, purposely built for temporary natural gas supply. We can affordably cover a single home for a few days while a line is tested, all the way up to an entire city or large industrial plant.

---

Cimarron Energy Inc.

Jeffrey Wilson (jwilson@cimarronenergy.com)
1012 24th Ave NW, Suite 100, Norman, OK 73069, USA
(405) 515-8279 (Phone)
http://www.cimarronenergy.com

Designer and manufacturer of upstream and midstream production and processing equipment, including vapor recovery towers, vapor recovery units, flares, and a large suite of manufacturer tested enclosed combustors.

---

COMM Engineering USA

Brian Boyer (brian@commengineering.com)
P.O. Box 53463, Lafayette, LA 70505, USA
(337) 237-4373 (Phone)
(337) 234-1805 (Fax)
http://www.commengineering.com

Total solution provider from concept through implementation for methane recovery and emission reduction. We identify, quantify, and implement reduction/recovery systems for fugitive leaks, vent/flare gas, and associated natural gas. COMM has proven management systems and technology for implementing a successful methane emissions reduction program. Our COMMtracker online system can be utilized for methane emissions reduction tracking and reporting and monetization of GHG emission credits.

---

Compressor Engineering Corporation

Jim Rauh (jrauh@ceconet.com)
5440 Alder, Houston, TX 77081, USA
(713) 664-7333 (Phone)
(713) 664-6444 (Fax)
http://www.ceconet.com

Manufacturer of LEP (Low Emission Packing) an industry proven method to minimize fugitive emissions from reciprocating compressor packing cases. CECO also manufactures engineered equipment including compressor valves, unloaders, activators/deactivators, pistons, rods including rolled threads. CECO repairs all makes of reciprocating compressors and offers in field support.

---

Compressco Inc.

Steve Torrez (storrez@compressco.com)
101 Park Ave Suite 1200, Oklahoma City, OK 73102, USA
(281) 460-5091 (Phone)
(281) 596-0943 (Fax)
http://www.csicompressco.com/

Compressco offers a natural gas driven reciprocating compressor (GasJack®) for VRU applications. Typical applications are with VRT systems and oil storage tanks in areas where electricity is not readily available and auto start capabilities are required. Compressco is also successful on the deliquification of marginal wells as well as working in conjunction with the following; pumping well units, plunger lift systems, intermittent soaping, velocity strings, and backside injection where packers are not present. Our expertise is production enhancement of oil and gas production with wellhead compression.

---

Contek Solutions, LLC

Michael Leonard (mikel@contekllc.com)
6217 Chapel Hill Blvd., Suite 300, Plano, TX 75093, USA
(469) 467-8296 (Phone)
(469) 467-8631 (Fax)
http://www.contekllc.com

Engineering: Analysis, design, cost estimating, bidding, implementation and project management. Safety: Process hazard analysis, integrity management, management systems, policies & procedures, training, industrial hygiene, ergonomics and compliance audits, infrared imaging. Environment: Optical gas imaging fugitive leak detection and quantification, environmental reviews, permitting, environmental studies, climate change, plans, environmental management systems, procedures and compliance audits.

---

Corken Inc. / a Division of IDEX

George Jenkins (gjenkins@idexcorp.com)
3805 NW 36th Street, Oklahoma City, OK 73112, USA
(405) 946-5576 (Phone)
(405) 948-7343 (Fax)
http://www.corken.com/Home

Corken is recognized as the leader in the manufacture of gas compressors under 100HP. Corken has been in the compression business since the late 40's and our expertise is in vapor recovery and transfer of hazardous, volatile, and toxic gases commonly found in the process gas industry. Outside of building compressors Corken also has the capability for complete turn key package design that includes structural steel skids, control panels with all the latest technologies and protection devices to protect your investment.

---

Corridor Field Services

Ryan Hittie (rhittie@corridorfieldservices.com)
2112 Rockland Dr, Hoover, AL 35226, USA
(205) 910-7573 (Phone)
http://www.corridorfieldservices.com/

Corridor Field Services deploys UAVs equipped with gas detecting thermal imaging cameras to identify and/or monitor methane leaks. Work can be performed at facilities or along pipeline corridors. Can provide routine monitoring missions to identify new leaks or ensure known leaks are controlled or eliminated.

---

Custom Compression Systems

Joseph Greco (jgreco@customcompressionsystems.com)
100 Phoenix Drive, Finleyville, PA 15332, USA
(724) 681-4414 (Phone)
http://www.customcompressionsystems.com

We offer both offshore & onshore gas compression packages ranging from 50HP to over 8000HP. We have aligned with the most respected manufacturers of engines, compressors, pumps & generators ensuring quality, reliability & technological advancements available in areas of noise, emissions & vibration.

---

Top of Page

- D -

DELTAIC Upstream Technologies, LLC

Ray Talabi (rtalabi@deltaicupstream.com)
6632 US HWY 181 N, Floresville, TX 78114-6251, USA
(844) 430-3510 (Phone)
(830) 393-1969 (Fax)
http://www.deltaicupstream.com

DELTAIC Upstream Technologies provides frack flow back and production testing services using process technologies that minimize methane emissions from various stages of separation during well testing operations. Clients require process separation and well clean up services post hydraulic fracturing stimulations. DELTAIC technologies eliminate methane emissions from control devices. The separation equipment also capture, measure and direct gases from gas phase and/or dissolution to pressurized tanks for further processing.

---

Detechtion Technologies

John Peters (jpeters@detechtion.com)
1149 Vista Park Drive, Suite C, Forest, VA 24551, USA
(800) 780-9798 (Phone)
http://detechtion.com/

Detechtion Technologies is the creator of Enalysis, the world's leading compressor optimization, fleet management, and maintenance tracking program. The Enalysis tool allows operations to monitor their equipment to ensure that it is running at optimal efficiency by identifying maintenance and operational issues that affect compressor production and fuel gas efficiency.

---

G.E. Energy - Becker Precision Equipment

Greg Giernoth (greg.giernoth@dresser.com)
1551 Greenleaf Avenue, Elk Grove Village, IL 60007, USA
(800) 323-8844 (Phone)
(847) 437-2549 (Fax)
https://www.geoilandgas.com/distributed-gas/distribution

Becker Precision Equipment ZERO BLEED technology eliminates methane emissions into the environment and saves thousands of dollars in lost and unaccounted for gas. With zero bleed technology, false gas leak service calls are curtailed. Become a better neighbor in your community with BPE GREEN products and have it pay for itself in no time. Jump to the BPE GREEN into GREEN worksheet to see how much you can save!

---

G.E. Energy - Texsteam

Charlie Parker (charlie.parker@dresser.com)
16240 Port Northwest, Houston, TX 77041, USA
(800) 945-9898 (Phone)
(713) 849-2879 (Fax)
http://www.dresser.com

Texsteam's iCIP Solar Intelligent Chemical Injection Pump & SolarLite systems are cost effective green alternatives to pneumatic & electric pumps. The solar system will pay for itself with the elimination of lost & consumed natural gas as well as electricity costs. The iCIP provides the dependability of a Texsteam pump with the ability to continuously inject chemicals, view performance data, log data, change parameters, connect & monitor analog & digital devices, & remotely monitor the system. Additionally, the SolarLite, using the same field proven Texsteam pump, is a cost effective option to the iCIP unit.

---

DynaFile

Brock Kane (sales@dynafile.com)
8400 E. Crescent Pkwy. Suite 600, Greenwood Village, CO 80111, USA
(888) 510-3453 (Phone)
http://www.dynafile.com

DynaFile offers a scalable, web-based document management solution that allows businesses to convert to paperless electronic filing and improve their carbon footprint.

---

Dynaseal Technologies AB

Martin Stenbaeck (mstenback@telia.com)
Lundagatan 50, Stockholm 11727, Sweden
46705127473 (Phone)

Dynamic seals create a barrier between moving and stationary surfaces in applications such as rotating, reciprocating shafts and pistons rings. Today, Dynaseal is active in the development of high performance seals for oil lubricated or oil-free seals and sealing systems for pumps, compressors, turbines or other mechanical devices. The Dynaseal technology is a unique and patented, oil-free, high performance mechanical sealing technology.

---

Top of Page

- E -

Eastern Industrial Supplies Inc.

Rodney True (rodney.true@easternfirst.com)
247 Interstate Blvd., Greenville, SC 29615, USA
(864) 284-3943 (Phone)
(864) 297-8039 (Fax)
http://easternfirst.com/

Eastern Industrial Supplies offers Bell-O-seal gate and globe valves. There is zero stem packing leakage due to the double walled bellows design. Each valve has a (through the stem) leak free guarantee for 20,000 on/off cycles. Typical valves run in the 1/2" to 6" size in 150, 300 and 800# classes. The valves are offered in forged steel and exotic metals. Actuation and customer specific modifications are welcome. The valves are available in flanged, threaded, buttweld, and socketweld end connections. Bell-O-seal valves will eliminate fugitive emissions seen in standard rope packing stem seals.

---

EcoSecurities

Toby A. Tiktinsky (toby.tiktinsky@ecosecurities.com)
215 Park Ave South, Suite 1903, New York, NY 10003, USA
(212) 356-0160 (Phone)
(212) 780-0941 (Fax)
http://www.ecosecurities.com

A leader in the field of climate change, EcoSecurities provides clients with forward-looking solutions, services and products that identify and capitalize on climate change risks and opportunities. EcoSecurities develops customized solutions for our clients, including establishing greenhouse gas emission baselines, implementing GHG accounting and reporting protocols, identifying reduction and offset opportunities, and optimizing carbon market strategies.

---

ECOTEC Solutions, Inc.

Jamie Tooley (jtooley@ecotecco.com)
850 S Via Lata, Colton, CA 92324, USA
(909) 906-1001 (Phone)
(909) 906-1002 (Fax)
http://ecotecco.com/

ECOTEC specializes in the design and development of equipment and technology solutions for gas collection, transmission, and treatment systems. The products of our efforts improve the accuracy and quality of gas measurement and leak detection data collected for use in our enterprise based software systems as well as those of our clients. ECOTEC’s innovation, ingenuity, and attention to detail provide continual advancements and opportunities for project developers, operators, and end users.

---

EDI

Wes Allen (wallen@hy-bon.com)
100 Ayers Blvd, Belpre, OH 45714, USA
(740) 401-4000 (Phone)
(740) 401-4005 (Fax)
http://www.ediplungerlift.com

EDI specializes in the design and development of user friendly controllers.

---

EFC Valve and Controls, Inc.

Pat Waters (patw@efcvalve.com)
3312 South Highway 101, Bridgeport, TX 76426, USA
(903) 220-8900 (Phone)
(940) 683-3727 (Fax)
http://www.efcvalve.com/

Eco-friendly solution to chemical injection process with Texsteam ICIP Solar Injection Pump and the "Enviro-Tank" - The first 100% weatherproof chemical tank and containment.

---

Emission Control International Ltd

244109 Partridge Place SW, Calgary, Alberta T3Z 3M2, Canada
(403) 217-1332 (Phone)
(403) 257-2525 (Fax)

Emission Control International Ltd. supplies Portable and Temporary Gas Compression services to the oil and gas industry, providing our customers with an efficient and effective alternative to flaring. Our services include Pipeline Evacuations, Well Testing without Flaring (Green Completions), Swabbing Alternative and H2S Vapor Recovery.

---

Emerson

Mark McCormick (Mark.McCormick@EmersonProcess.com)
1675 West Campbell Rd., Sidney, OH 45365, USA
(937) 493-2844 (Phone)
(405) 948-7343 (Fax)
http://www.emerson.com/en-us

Emerson supplies electric scroll compressors for oil and gas production and processing applications. Variable speed scroll packages enable customers to reduce greenhouse gas emissions, lower maintenance costs, increase workforce productivity, and economically recover lower pressure reserves. Copeland Scrolls can be packaged for 20-750 mcfd and discharge pressures from 50-345 psig.

---

Energy Recovery

Sandy Golden-Dukes (sgoldendukes@energyrecovery.com)
1717 Doolittle Dr., San Leandro, CA 94577, USA
(510) 746-5016 (Phone)
(510) 483-7371 (Fax)
http://www.energyrecovery.com

Amine gas processing is a treatment method in which the existence of large pressure differentials presents a unique opportunity to recover energy and produce substantial amounts of power. With Energy Recovery's Technology, this energy can be harvested and injected back into the treatment system where it can be used to re-pressurize the lean amine. This results in an overall boost in system efficiency by decreasing energy consumption, reducing carbon footprints and minimizing operating expenditures.

---

Energy Transfer Technologies

Cliff Harris (cliff.harris@energytransfer.com)
2838 Woodside, Dallas, TX 75032, USA
(469) 484-5340 (Phone)
http://www.ettdualdrive.com/

Perhaps the greatest improvement in compression technology in 50 years. Now there's a way to capture the best that natural gas and electrically driven compression have to offer. Natural gas-fired reciprocating engines, and sometimes, electric motors, are the typical drivers used to power natural gas compressors. Gas engines and electric motors have improved over the years, reaching today's level of dependability, but individually each has its drawbacks. Now ET Technologies, of Dallas, Texas offers a way to utilize the best characteristics natural gas.

---

EnerisQ International, LLC

12504 East LaSalle Place, Aurora, CA 80014, USA
(303) 317-5491 (Phone)
(303) 317-2510 (Fax)

EnerisQ utilizes staff that are highly experienced in providing conventional nondestructive testing services, advanced nondestructive testing services and specialty inspection services. Our clients benefit from the complimentary services and technical experience to improve productivity and maximize the effectiveness of their inspection budgets. We specialize in online tank inspection and cleaning (OTIS robotics), pipeline integrity testing (UWT), and tubular inspection (NDT).

---

Top of Page

- F -

FCI-Fluid Components International

Randall J. Brown (randyb@fluidcomponents.com)
1755 La Costa Meadows Drive, San Marcos, CA 92078-5115, USA
(760) 744-6950 (Phone)
(760) 736-6250 (Fax)
http://www.fluidcomponents.com

Leading manufacturer and global supplier of flow meters and flow measuring instrumentation. Specialists in methane, biogas, digester gas, landfill gas and natural gas flow measurement. Superior low flow sensitivity with wide turndowns. No moving parts, non-clogging, no pressure drop and global agency approvals for hazardous/explosive environment installations. Solutions for line sizes from 1/4" to 99" [6mm to 2515 mm].

---

First Climate, LLC

Cizuka Seki (cizuka.seki@firstclimate.com)
1401 New York Ave. NW Suite 1225, Washington, DC 20005, USA
(202) 638-0274 (Phone)
(202) 331-3383 (Fax)
http://www.firstclimate.com

First Climate is a vertically integrated carbon asset management company with a proven track record in voluntary and compliance carbon markets. First Climate has a strong presence in buyers and sellers markets and is a pioneer in methodology development for new project types. In addition to our global operations, First Climate has a presence in the U.S. market as a carbon asset developer and purchaser of carbon credits on behalf of voluntary and pre-compliance buyers.

---

Flare Industries, LLC.

Joshua Joshua (jkurtenbach@flareindustries.com)
125 Technology Drive, Suite 206, Canonsburg, PA 15317, USA
(724) 271-1030 (Phone)
http://www.flareindustries.com

Flare Industries designs, manufactures, and supply emissions control equipment for all sectors of the oil & gas, chemical, and bio-gas industries. Products include, but are not limited to: Flares, Enclosed Flares, Multi-point Ground Flares, Incinerators, Pit Flares, etc. The CEB technology from Bekaert is one of our product lines.

---

FLIR

Paul Czerepuszko (pac@flir.com)
25 Esquire Road, North Billerica, MA 01862, USA
(978) 901-8478 (Phone)
(978) 901-8887 (Fax)
http://www.goinfrared.com

GasFindIR is one of a kind! This revolutionary new infrared camera or thermal imager finds greenhouse gas emissions or volatile organic compounds (VOCs). Capable of rapidly scanning large areas and miles of piping, this highly specialized infrared camera finds gas leaks...fast! The GasFindIR can help you significantly improve worker safety, environmental and regulatory compliance, not to mention helping to improve the bottom line by finding leaks that essentially "lose" product and profits! GasFindIR has been lab tested to detect: Benzene, Ethanol, Methane, Propane and many others.

---

FLSmidth Inc.

Timothy Kyle (tim.kyle@flsmidth.com)
2040 Avenue C, Bethlehem, PA 18017, USA
(610) 264-6204 (Phone)
(610) 264-6715 (Fax)
http://www.flsmidth.com/

FLSmidth manufactures sliding vane compressors and compressor packages for multiple gas applications including well head gas, VRUs, coal bed methane, landfill gas, and other gas applications. Flow capability ranges from 150 to 3500 SCFM and pressure ranges from -29.8 Hg to +125 psig.

---

Fluenta Inc.

Paul Khuri (paul.khuri@fluentainc.com)
1155 Dairy Ashford Suite 211, Houston, TX 77079, USA
(281) 972-2004 (Phone)
(281) 497-8687 (Fax)
http://www.fluenta.com

The Fluenta Flare Gas Meter is the most robust and accurate flare monitor on the market today, and an essential tool for E&P operators. The FGM 160 has been developed to measure flare gas in pipes where pressure, a wide range of velocities, and large pipe diameters represent a great challenge. It has the highest turndown ratio 3330:1 in the market and also has the ability to give density output. It is the only fully non-intrusive meter for all pipe diameters. The meter is used in the North Sea for taxation of CO2.

---

FW Murphy

Wayne VanBrunt (wvanbrunt@fwmurphy.com)
5311 S. 122nd East Ave., Tulsa, OK 74147, USA
(918) 317-4300 (Phone)
(918) 317-4266 (Fax)
http://www.fwmurphy.com

Provider of pneumatic and electronic instrumentation products for the monitoring, control and communications of engine driven equipment for a wide range of Industrial and oil and gas applications.

---

Top of Page

- G -

Gas Imaging Technology

Michele Hinnrichs (micheleh@gitint.com)
85 Industrial Way, Buellton, CA 93427, USA
(805) 688-6452 (Phone)
(805) 686-2723 (Fax)
http://www.gitint.com

Sherlock gas imaging and analysis system is a small, hand-held, battery operated imaging spectrometer designed for gas leak imaging, quantification and analysis. Field tested at numerous petrochemical, refining and processing plants where it demonstrated sensitivity to see gas leaking as low as 1 gram per hour. Applications for the Sherlock range from environmental monitoring, safety and risk mitigation to process control for all types of industries: oil, gas, chemical, power generation, mining, pulp & paper, just to name a few.

---

Gas Recon Inc.

Doug Hunter (doug.hunter@gasrecon.ca)
400, 3115 - 12 St NE, Calgary, Alberta T2E 7J2, Canada
(403) 517-3136 (Phone)
(403) 291-5390 (Fax)
https://www.gasrecon.ca/

Gas Recon Inc. specializes in portable and mobile leak detection and fugitive emissions mapping, quantification and monitoring. Our services, although rooted in line-walking operations, have been optimized by the use of real-time positioning and reporting and by the use of our custom dynamic cloud-based data management system. Our innovative, high-tech solutions for mobile emissions mapping and imaging take fugitive emissions management to a new level, and include new sensor development for stationary facilities monitoring and airborne plume mapping.

---

Gas Recovery Specialists

Jeff Schmidt (jeff.schmidt@gasrs.com)
452 West Jamesway, Cary, IL 60013, USA
(224) 639-5453 (Phone)
(847) 516-5855 (Fax)

GasRS provides leak detection, measurement, and analysis services for the natural gas industry with a focus on cost effectiveness. We can use leak survey information that provides a variety of value-added services to companies that include a) developing site-specific GHG emission factors; b) quantifying and validating GHG emissions credits; c) assisting with corporate communications related to carbon footprint reductions & GHG reporting; d) developing GHG inventories; e) developing emissions reduction projects; f) establishing and improving maintenance programs (prioritizing repairs); and g) improving site safety. GasRS will also train facility personnel to perform leak surveys (DI&M, LDAR) using industry-accepted equipment and methodologies. Call us and learn firsthand that safety and customer service are our top priorities.

---

Gardner Denver Nash LLC

Tom Dardis (tom.dardis@gardnerdenver.com)
200 Simko Boulevard, Bentleyville, PA 15022, USA
(704) 942-3905 (Phone)
(704) 942-3908 (Fax)
http://www.gardnerdenvernash.com

Liquid ring vacuum pump and compressor systems for vapor recovery units (VRUs) and artificial lift on marginal/stripper wells.

---

Global Oil Flow USA, LLC

Skip Marks (smarks@globaloilflow.com)
322 Neff Ave., Harrisonburg, VA 22801, USA
(540) 437-9385 (Phone)
(540) 437-5386 (Fax)
http://www.globaloilflow.com

Global Oil Flow (GOF) is in the business of enhancing and optimizing artificially lifted wells. GOF has combined its patented, state-of-the-art walking beam compressor (OFC©) with an integrated, fully automated Variable Frequency Drive, Pump-off Control and proprietary Rod Pump Optimization Software. Through this unique suite of products, SmartJack™, GOF is able to increase oil and gas production while decreasing energy consumption, maintenance costs, and labor costs associated with well management and operation. SmartJack™ enables operators to increase service intervals and extend well life.

---

Graylon, L.L.C.

John Senor (graylon@gmail.com)
9125 Viscount Row, Dallas, TX 75247, USA
(972) 971-9795 (Phone)
http://www.graylon.com

Graylon, L.L.C. is an approved packager of Ro-Flo, Leroi, Rotorcomp, and Mattei Gas compressors. We specialize in vapor recovery, Lact, and BTEX eliminators. We currently have the equipment to weld, lift, document, and package compressors up to 200 hp. Pressure Vessels and Stainless After coolers are manufactured in house.

---

Guild Associates, Inc.

Mike Mitariten (mike@moleculargate.com)
5750 Shier-Rings Road, Dublin, OH 43016, USA
(908) 752-6420 (Phone)
(614) 798-1972 (Fax)
http://www.moleculargate.com

Guild provides natural gas purification equipment including the Molecular Gate technology to remove N2 and CO2 from contaminated natural gas. Modular plants are provided for this purpose, as well as dehydration and dew point control.

---

Gulf Coast Green Energy

Loy Sneary (loy@gcgenergy.com)
1801 7th Street; Suite 230, Bay City, TX 77414, USA
(979)-240-3512 (Phone)
(979) 245-1327 (Fax)
http://gulfcoastgreenenergy.com/

Energy efficiency and emissions reductions for large stationary engines and flares. We generate fuel and emission free power from wasted heat.

---

Top of Page

- H -

Heath Consultants, Professional Services Division

Milton Heath III (milt.heath3@heathus.com)
9030 Monroe Rd., Houston, TX 77061, USA
(713) 844-1304 (Phone)
(713) 844-1309 (Fax)
http://heathus.com/

Services provider for the natural gas industry for identifying fugitive methane emissions and accurately measuring them with the Hi Flow Sampler. With this data, companies can establish baselines and plan maintenance programs. Heath has performed surveys worldwide in support of Joint Implementation Projects. Heath has programs to help companies achieve emission reduction goals at compressor and gate stations by as much as 90 percent. Heath manufactures its own equipment, provides sales and service. We can train your personnel to perform in- house surveys with the same instruments we use.

---

Heath Consultants Incorporated

Milton Heath (milt.heath3@heathus.com)
9030 Monroe Road, Houston, TX 77061, USA
(713) 844-1300 (Phone)
http://www.heathus.com

Directed Inspection and Maintenance Program; Leak Rate Measurement Survey; Compressor and Gate Stations; Distribution Systems; Baseline Methane Emissions Inventory; EPA Gas Star Best Management Practice; CDM, JI Audits for Kyoto Protocol; Feasibility Studies; Training; Subpart W; Flow rate of the sampling products.

---

Hoerbiger Corporation of America

Christean Kapp (Chris.Kapp@Hoerbiger.com)
1212 Milby St., Houston, TX 77023, USA
(281) 569-9696 (Phone)
(713) 224-7527 (Fax)
http://www.hoerbiger.com/

Compressor valves, sealing, rings and packings, power rings, leak detection and monitoring, controls, condition monitoring, machinery protection, explosion relief, check valves and service solutions for reciprocating compressors and gas engines in the oil and gas industry.

---

Huco Consulting

Ronald Huijsman (rhuijsman@hucoconsulting.com)
107 Detering St Unit B, Houston, TX 77007, USA
(713) 545-4563 (Phone)
http://www.hucoconsulting.com

Huco Consulting provides data management services for methane and GHG releases. Huco helps its clients to plan, implement and use information managements systems to efficiently and accurately collect, process and report emissions data.

---

Hy-Bon Engineering Company, Inc.

Jeff Voorhis (jvoorhis@hy-bon.com)
2404 Commerce, Midland, TX 79703, USA
(512) 694-8455 (Phone)
(432) 697-2292 (Fax)
http://www.hy-bon.com

HY-BON/EDI is the global industry leader since 1952, specializing in the identification, quantification and capture of low press.

---

Top of Page

- I -

ICF International

Hemant Mallya (Hemant.Mallya@icfi.com)
9300 Lee Highway, Fairfax, VA 22031, USA
(703) 934-3048 (Phone)
https://www.icf.com/

ICF International helps clients develop and implement strategies to navigate an increasingly complex array of environmental regulatory requirements and opportunities in the GHG arena. From qualifiying carbon footprints to emission credit monetization, ICF's team has in-depth expertise. Our services range from developing inventory methodologies to developing emission reduction projects and measurement studies to corporate strategy development. ICF combines a long track record in climate change, environmental expertise, and business analysis skills to help clients in the energy sector.

---

Insight Emissions Management Inc.

Allan Bouwers (abouwers@insightemissions.com)
Suite 6F, 100-7th Ave. SW, Calgary, Alberta T2N 3K6, Canada
(403) 875-6990 (Phone)
http://www.insightemissions.com

Insight, builds software that runs on a tablet and is connected to the FLIR camera that streamlines the capturing of IR video and data, as well as provides a one-click sync to a secure, online web application where clients would be able to access the information and videos. A number of companies are currently automating regulatory requirements and creating tasks based on those requirements. Data Capture and Workflow: Asset Tagging: Synchronize Online Seamlessly: Automate Compliance and Manage Risk: Economic Assessment: Track Repairs and Replacements: Email Notifications: One-Click Regulatory Reports:

---

Integral Environmental Corporation

Marty Flanders (marty@integral-e.com)
1620 E. Sh 121 Bus., Suite C-100, Lewisville, TX 75056, USA
(972) 492-3310 (Phone)
(972) 492-3320 (Fax)
http://www.integral-e.com/

Environmental Phase I, II, III Assessments, Soil & Groundwater Sampling, Monitoring Well Installation, SPCC Plans, Stormwater Plans, Site Remediation, Waste Disposal.

---

IRT Consult, Inc.

Darren Whyte (darren@irtconsult.com)
2700 West Atlantic Boulevard, Suite 266 #682, Pompano Beach, FL 33069, USA
(800) 683-8088 (Phone)
(888) 483-1831 (Fax)
http://www.irtconsult.com

IRT Consult, Inc. are providers of Optical Gas Imaging Services. We use thermal imaging technology to identify VOC Gas leak sources within industry. We offer our services to clients worldwide.

---

ITT Corporation - Angel Services

Daniel Brake (angel@itt.com)
800 Lee Road, Rochester, NY 14606, USA
(585) 269-5121 (Phone)
(585) 269-5603 (Fax)
http://www.itt.com/Home/

ITT's Airborne Natural Gas Emission Lidar (ANGEL) Services delivers the energy industry's most comprehensive aerial leak survey and corridor monitoring service. ANGEL Services uses advanced laser technology to detect, quantify, image and precisely pinpoint natural gas pipeline leaks and facility emissions. ANGEL Services can inspect up to 1,000 pipeline miles per day with guaranteed survey coverage and results. In addition, ANGEL Services also delivers color mapping imagery and digital patrol videos of your rights-of-way and surrounding areas. Enhance your efficiency and safety with the ANGEL Services.

---

Top of Page

- J -

John Zink

Melissa Hennrick (melissa.hennrick@johnzink.com)
11920 East Apache, Tulsa, OK 74116, USA
(918) 439-5912 (Phone)
https://www.johnzink.com/quad-o-regulated-emission-control/

Our Production Combustors and Flares capitalize on over 60 years of experience. No other supplier offers this proven experience and success. We are supported by a large manufacturing resource to build equipment quantities as needed to meet your requirements to comply with this demanding regulation. Our engineers developed our Production Flares and Combustors from the customers' point of view with a focus on safety, easy operation and optimum performance.

---

Jordan Technologies

Dan Jungo (djungo@jordantech.com)
2820 S. English Station Road, Suite 200, Louisville, KY 40299, USA
(502) 648-2578 (Phone)
http://www.jordantech.com

Jordan Technologies has been an engineering services leader since 1980, performing service on vapor control systems and growing to a global manufacturer and service provider to the petroleum, petrochemical, ethanol and natural gas industries. The Jordan Technologies organization is structured into three primary divisions:Vapor Recovery and Vapor Combustion Unit Manufacturing, Vapor Recovery Unit and Vapor Combustion Unit Service, and Testing Air Filtration Products and Services.

---

Top of Page

- K -

Kimray, Inc.

Kevin Gentry (kgentry@kimray.com)
52 N.W. 42nd Street, Oklahoma City, OK 73118, USA
(405) 525-6601 (Phone)
(405) 521-9907 (Fax)
https://kimray.com/

Manufacturer of comprehensive line of control valves, thermostats, energy-exchange glycol pumps, intermittent bleed pilots and other control devices. Our products are used to control vessel and lead line temperatures, liquid level inside pressurized vessels, pressure drops, and liquid and gas flow.

---

KJ Environmental Mgt., Inc.

Kevin Ware (kevin@kjenvironmental.com)
109 Oakland Street, Denton, TX 76201, USA
(940) 387-0805 (Phone)
(940) 387-0830 (Fax)
http://www.kjenvironmental.com

KJ Environmental Mgt., Inc. is an environmental engineering firm that specializes in oil/gas emissions monitoring, quantification, and technology design. KJ Environmental can identify the issues and then design the solutions by employing several types of vapor control technologies. For more information, please do not hesitate to call or email us.

---

Knighten Industries, Inc.

Ron Leach (ron@knind.com)
3323 N. County Road West, Odessa, TX 79764, USA
(432) 557-6977 (Phone)
(432) 362-9813 (Fax)
https://www.knightenindustries.com/

Turn Key Energy Solutions, Custom and Standard Vapor Recovery Unit Designs for Tank Vapor, Wellhead Casing Gas recovery, Coal Bed Methane Recovery, and Gas Gathering. Up to 300 HP and 3118 MCFD. Complete Line of Environmental Pump Packages.

---

Top of Page

- L -

LaSen ALPIS

Jennett Russell (rrjennett@zianet.com)
300 N Telshor; Suite 400, Las Cruces, NM 88011, USA
(505) 522-5110 (Phone)
(505) 522-6355 (Fax)
http://www.laseninc.com

Airborne pipeline surveying and leak detection.

---

Leak Surveys Inc.

Bud McCorkle (bmccorkle@leaksurveysinc.com)
PO Box 3066, Early, TX 76803, USA
(325) 641-8147 (Phone)
(325) 641-2542 (Fax)
http://www.leaksurveysinc.com

Leak Surveys Inc is an innovative new company that services the oil and gas industry using specialized infrared technology. Leaking gas emissions are seen in real time and resemble a black cloud of smoke. Leaking components can be quickly identified using the Hawk Camera Leak Detection System. Helicopter surveys are also available for aerial inspections of pipelines and tank farms. Leak Surveys Inc is an international company and has conducted surveys in 25 countries to date. Leak Surveys Inc. was the 2007 winner of the EPA's Clean Air Excellence Award and also the TCEQ's 2007 Innovative Technology Award.

---

Leak Finder, Inc.

Joe Matsko (joematsko@leakfinderinc.com)
24850 Aurora Road, Unit D, Cleveland, OH 44146, USA
(800) 218-1828 (Phone)
(440) 786-1945 (Fax)
http://www.leakfinderinc.com

Leak Finder, Inc. is an international provider of leak detection/quantification services for governmental, industrial, commercial, and private sectors utilizing state-of-the-art tuned diode laser technology that increases the speed of routine surface inspections ten-fold. Our instruments and techniques are EPA method 21 compliant. We also utilize traditional FID, PID, TVA, Airborne Ultrasound and infrared instruments to augment our leak detection/quantification services. Our aerial and ground-based inspections are offered internationally. Please feel welcome to contact us!

---

Leak Imaging, LLC

Lance Swanner (lance@leakimaging.com)
P.O. Box 502, Judson, TX 75660, USA
(903) 930-2904 (Phone)
http://www.leakimaging.com

Leak Imaging, LLC can detect fugitive emissions safely from leaking components, gathering/transmission lines and equipment with optical gas imaging. By pin pointing leaks at the direct source, you can effectively prepare and prioritize gas leak repairs. Our goal is to help you provide a safe environment by reducing Greenhouse Gas emissions. We are confident that you will save money by reducing operating cost while increasing revenue.

---

Top of Page

- M -

Measurement Controls, Inc.

Paresh Patel (sales@measurementcontrols.com)
6131 Old Concord Rd., Charlotte, NC 28213, USA
(704) 921-1101 (Phone)
(704) 921-1010 (Fax)
http://www.measurementcontrols.com

Gas meters: (1) re-manufacturing as per ANSI Standards, (2) calibration as per ISO-17025, (3) finding and fixing leakages from meters as per ANSI Standards.

---

Merrill Lynch

Martin Berg (martin_berg@ml.com)
2 King Edward Street, London EC1A 1HQ, UK
+44 20 7995 9057 (Phone)
https://www.ml.com/

Merrill Lynch offers an innovative and wide-ranging global commodities product and service portfolio that includes carbon emissions, structuring, trading, and marketing of metals, natural gas and power, crude oil, refined products, natural gas liquids, coal, commodity indices, wet and dry freight, and weather products. Discover how Merrill Lynch delivers exceptional solutions for exceptional clients.

---

MIRATECH Corporation

Elise Kelly (ekelly@miratechcorp.com)
7410 Greatwood Lake Drive, Sugar Land, TX 77479, USA
(281) 727-9222 (Phone)
http://www.miratechcorp.com

Exhaust emission solutions for industrial engines including VOC emission reduction for process industries such as chemical, pharmaceutical, petro-chemical, painting, adhesives, food production, printing and other industries. We combine advanced engineering, vast real-world experience and ceaseless innovation to meet even the most aggressive regulatory requirements. MIRATECH's 3-way NSCR, oxidation, SCR catalyst systems, VOC Smart Oxidizers, Diesel Particulate Filters (DPF's) and AFRC controls are utilized within many industrial applications, including: Gas Compression – gathering, refining, transmission, and storage; Power Generation – prime power, distributed generation (DG), cogeneration, and standby/emergency; Rail – switching, line-haul, and passenger; Brown Water Marine; Water and Liquids Pumping; Air Compression; Drilling Rig Gensets

---

Monico Inc.

Mark Gerard (outreach@monicoinc.com)
18530 Klein Church Road, Spring, TX 77379, USA
(281) 350-8751 (Phone)
(888) 418-5955 (Fax)
http://www.monicoinc.com//

---

Montrose Air Quality Services

Tanya Jackson (Tjackson@montrose-env.com)
1 Park Plaza, Suite 1000, Irvine, CA, 92614, USA
(909) 809-9962 (Phone)
http://montrose-environmental.com/

Leak Detection; Optical Gas Imaging; Online Database; Tank Seal Inspections; DOT Pipeline Surveys; Emission Calculations

---

M-Squared P&S, Inc.

John Miguez (jmiguez@m-squaredinc.com)
415 Raywood Dr., Lafayette, LA 70503, USA
(337) 406-8028 (Phone)
http://www.m-squaredinc.com

Vapor Recovery Units (VRU) Packing leak detection and recovery systems. Compressor packing for special applications. Liquid cooled packing cases.

---

Muscle Products Corp

Sharon Dittrich (sharon@mpclubricants.com)
752 Kilgore Road, Jackson Center, PA 16113
(814) 786-0166 (Phone)
(814) 786-7321 (Fax)
http://musclelubricants.com/

Manufacturer of lubricants, fuel additives and greases.

---

MV Technologies

Susan Schrank (susan.schrank@mvseer.com)
741 Pine Ridge Road, Golden, CO 80403, USA
(303) 277-1625 (Phone)
http://mvseer.com/

The V3RU(tm) is a patented, vapor capture system developed to help well operators comply with increasing air emissions regulations. It works by reducing (and eliminating) incidence of flare gas venting by capturing a large portion of the flash gas during well cycling, thereby reducing pressure in the production tank and enabling the flare to burn more uniformly. The V3RU has delivered consistent in-field measurements - indicating that once the V3RU system is engaged, the peak pressure in the tank is significantly lowered. No electricity required, modular and cost-effective.

---

Top of Page

- N -

NATCO

Shannon Thompson (sthompson@natco-us.com)
6 Desta Drive, Suite 1300, Midland, TX 79705, USA
(432) 685-9269 (Phone)
http://www.natcogroup.com

NATCO provides production equipment manufacturing, sales, service, refurbishment, and training. We engineer, design, and build stock production equipment as well as items built for customer specific applications. Standard product families are separators, treaters, dehydration equipment, gas production equipment, CO2 separation and acid gas removal along with field support, service, and repair. We provide startup assistance, turnaround expertise, and instrumentation installation and repair. We have field operations throughout the US and global gas and oil fields.

---

NDTrack Technologies

Roger Cobert (rcobert@ndtrak.com)
3861 Ambassador Caffery, Suite 115, Lafayette, LA 70503, USA
(337) 593-9764 (Phone)
(337) 593-9768 (Fax)
http://www.ndtrak.com

NDTrak Technologies is proud to provide optical leak detection services to the production, processing, transmission and distribution sectors of the petrochemical industry. Our experienced technicians have performed extensive inspections on offshore and onshore facilities, and detected large numbers of leaks with significant safety and economic benefits to our clients. We are also able to provide assistance in complying with EPA GHG emission inventory regulations.

---

Newpoint Gas

John David (seo@tayloredideas.com)
100 Graham Road, College Station, TX 77845, USA
(979) 690-8749 (Phone)
http://www.newpointgas.com/

At Newpoint Gas, LP we have experience in all areas of natural gas treating and gas processing. This experience allows us to offer producers solutions for their natural gas needs. Our experience includes equipment installation with start-up support and training. Newpoint also provides contract gas treating services in which we furnish all equipment and operations that are required to meet sales gas specifications.

---

Nichols Given Associates

Drew Hyatt (drew@ngainc.com)
7108 S. Alton Way Bldg. K, Centennial, CO 80112, USA
(303) 773-1401 (Phone)
(303) 773-1434 (Fax)
http://www.ngainc.com

Providing a Zero Emission valve actuator, to replace natural gas powered pneumatic devices currently used to control valves throughout the oil and gas sector. Eliminate methane emissions, remove old expensive technology and prioritize your investment to maximize your ROI and profits. These actuators are designed to control valves in on/off applications and modulating control applications.

---

Nopetro

Jack Locke (jlocke@nopetro.com)
2625 Ponce de Leon Blvd., Coral Gables, FL 33134, USA
(305) 441-9059 (Phone)
(305) 379-4208 (Fax)
http://nopetro.com/

Nopetro is dedicated to designing, building, operating, maintaining and supplying CNG and LNG fueling stations to develop a network of publicly accessible compressed natural gas ("CNG") and liquefied natural gas ("LNG") fueling stations throughout the Southeast for heavy and medium duty vehicles.

---

NORM Services, LLC

Robert Krumberger (rkrumberger@normservices.com)
6535 S. Riviera Way, Aurora, CO, 80016
(720) 476-4178 (Phone)
http://www.normservices.com

Full service environmental compliance, regulatory assistance, and NORM management.

---

Norriseal

Jim Adams (jadams@norriseal.com)
11122 W. Little York, Houston, TX 77041, USA
(713) 466-3552 (Phone)
(713) 869-7386 (Fax)
http://www.norriseal.com

Norriseal EVS, Envirosave, patented Zero-Leak pneumatic snap pilot switch is designed for level measurement and control in oil and gas production markets. Envirosave stops fugitive gas emissions and is listed at "zero leakage" in the Gas STAR Lessons Learned study, Options for Reducing Methane Emissions from Pneumatic Devices in the Natural Gas Industry.

---

Top of Page

- O -

Opgal Optronic Industries Ltd.

Alberto Wahnon (wahnon@opgal.com)
21st Hanapach Street, Karmiel, Israel, 2161401
+9 (724) 995-3961 (Phone)
http://www.opgal.com

EyeCGas®: An OGI camera design for the demands of the industry, EyeCGas® is a rugged hand-held camera using thermal imaging technology for the detection of gas leaks and fugitive emissions certified for use in hazardous locations Class1 Div2 & ATEX Zone2 Benefits

• Safety – Detect safety risks by providing a clear visual of methane and VOC emissions.
• Environment - Quickly and clearly detect invisible fugitive gas emissions that are harmful to the environment.
• Operational Efficiency - Scanning for multiple elements simultaneously reduces the cost for leak detection and minimizes product loss.

---

Top of Page

- P -

Pacific Process Systems,Inc.

Terry Alberts (talberts@pps-equipment.com)
195 Hatfield Road, Amity, PA 15311, USA
(281) 381-0584 (Phone)
http://www.pps-equipment.com/

Specialized well test equip, flare units to meet 40 CRF 60 requirements.

---

Pergam Technial Services, Inc.

Johan Wictor (jwictor@pergamusa.com)
209 SW 41st Street, Renton, WA 98057, USA
(425) 251-1483 (Phone)
(425) 642-8183 (Fax)
http://pergamusa.com/

Aerial, handheld, vehicle and UAV laser-based remote methane sensing technology for the gathering, transmission and distribution gas industry.

---

Platinum Vapor Control

Bernie Phillips (bphillips@platinumcontrol.com)
2822 West 5th Street, Fort Worth, TX 76107, USA
(817) 529-0983 (Phone)
(817) 977-4896 (Fax)
http://www.platinumvaporcontrol.com

The oil and gas industry is becoming increasingly regulated with higher environmental standards. Recent EPA regulations call for control systems to reduce emissions by 95% on stock tanks containing API gravity oil greater than 40” and a gas-oil ratio greater than 1,750 Standard Cubic Feet per stock tank barrel. Platinum Vapor Control’s Vapor Recovery Units (VRU) enables you to minimize greenhouse gas emissions, maintain environmental compliance, and maximize well production.

---

Platinum Control Technologies

Brad Wilson (bwilson@platinumcontrol.com)
2822 West 5thStreet, Fort Worth, TX 76107, USA
(877) 374-1115 (Phone)
http://www.platinumcontrol.com

Platinum Control's Burner Management Systems provide automated remote burner management, ignition and temperature controls. The systems enable you to record essential data and safely automate heating processes, decreasing injury risk, maximizing well production and facilitating environmental compliance. Platinum Control's Burner Management Systems support any natural draft burner up to 10MMBtu/Hr on oil and gas production equipment, including the following: Production Units; Dehydrators; Heated Separators; Line Heaters; Treaters; VOC Combustors; Oil Stabilizers; Amine Plants. Platinum Control's systems are certified as a whole Burner Management Unit with CSA/UL ratings.

---

PLCS Inc.

Howard Hardwick (hhardwick@plcsusa.com)
102 Gaither Drive, Unit 1, Mount Laurel, NJ 08054, USA
(856) 722-1333 (Phone)
(856) 273-9723 (Fax)
http://www.plcsusa.com

Cast iron gas mains will last at least a another 200 years and the tremendous cost of their replacement is unnecessary. Over 3 million cast iron joints have been permanently sealed against leakage by the 60+ US and many European gas distribution companies who install PLCS encapsulation kits using their own labor or contractors. This simple, inexpensive process renews cast iron pipe systems one joint at a time so they will never leak methane into the atmosphere again. PLCS passes every performance test in the industry including British Gas LC8 and Cornell/New York Gas Group.

---

Profire Energy Inc

David Collier (dcollier@profireenergy.com)
321 S 1250 W Suite 1, Lindon, UT 84042, USA
(801) 796-5127 (Phone)
http://www.profireenergy.com

Profire's Burner Management Systems (BMS) manage burner flames in natural-draft, fire-tube heaters, allowing for advanced temperature-setpoint control, remote monitoring, sparing fuel-use and safer operations. The PF2100 BMS is a versatile, capable, easy-to-use system applicable to a variety of combustion applications. Flare Ingnition Systems (FIS) manage burner flames and control vales in continuous-spark mode (PF2100F) or detect flame status, reigniting as needed (PF1300). These systems aid in the reduction of methane and other VOC emissions.

---

Puffer-Sweiven, LP

Todd Andrus (todd.andrus@puffer.com)
4230 Greenbriar, Stafford, TX 77477, USA
(281) 240-2000 (Phone)
http://www.puffer.com/Public/index.asp

We offer a variety of low-bleed instrumentation and controls products for use on separators, compression packages, production and processing skids, pipeline interconnects, stations and distribution networks. Products include control valves and positioners, pressure regulators, level controllers, pneumatic controllers, transducers, etc.

---

Purestream Technology

Todd Whiting (twhiting@pstrep.com)
510 S. 600 E., Salt Lake City, UT 84102, USA
(866) 582-8388 (Phone)
http://www.purestream.com/

State-of-the-art Air Emissions Scrubbing. Patented Wastewater Disposal Process. Combined Heat and Power. The Purestream Technology System reclaims waste heat produced in power generation and VOC/HAP destruction and re-uses it in the air emissions scrubbing and water disposal processes.

---

Top of Page

- Q -

Questor Technology Inc

John Hankins (jhankins@questortech.com)
1121, 940 - 6th Avenue SW, Calgary, Alberta T2P 3T1, Canada
(403) 539-4373 (Phone)
(403) 571-1539 (Fax)
http://www.questortech.com

Questor design and manufacture proven technology for well test rentals and for permanent facility installations. Questor Incinerators save our customers money through reduced fuel gas consumption, lower operating costs, less maintenance and smaller lease sizes. Questor Incinerators create the best plume dispersion available, providing up to 99.99% combustion efficiency without any particulate matter, poly-nuclear aromatic hydrocarbons (PAH's) or unburned hydrocarbons.

---

Top of Page

- R -

REM Technology Inc.

Cam Dowler (cam.dowler@remtechnology.com)
305-27 Street SE, Calgary, Alberta T2A 7V2, Canada
(403) 695-2318 (Phone)
http://www.remtechnology.com

REM Technology (RTI) provides optimization and control technology for compressor/engines. The application of our technology, REMVue, results in significant fuel gas reductions, NOx and CO compliance and substantial Green House Gas (GHG) reductions. SlipStream, is a newly introduced, patent pending technology that enables vented hydrocarbons to be burned as fuel gas for natural gas engines. Thus, more methane gets to market. See presentation on this website from the 14th Annual Natural Gas STAR Implementation Workshop Houston, TX October 22-24, 2007 by Petro-Canada.

---

Remediation Service International

Kevin Fritz (kevin.fritz@rsi-save.com)
4835 Colt St. Unit D, Ventura, CA 93003, USA
(800) 368-8685 x13 (Phone)
(805) 644-8830 (Fax)
http://www.rsi-save.com

Soil remediation and tank degassing systems. Vapor abatement equipment for centrifuges and oil and natural gas production sites, cogeneration of energy that previously had been vented or flared. Specially designed Internal Combustion(IC) engines use the flash vapors from tank batteries to produce electricty or run compressors to recompress methane to pipleine pressure for sale.

---

Rotor-Tech, Inc.

Richard Garrett (rgarrett@rotor-tech.com)
10613 Stebbins Circle, Houston, TX 77043, USA
(713) 984-8900 (Phone)
(713) 984-9425 (Fax)
http://www.rotor-tech.com

We manufacture glycol pumps for natural gas dehydrators. We have been doing this for 27 years and we are very successful. Our electrically-driven specialized gear pumps are in use all over the world. We have now started making pumps for Amine service.

---

Roughrider Power

Brian Moon (brian@roughriderpower.com)
1830 Burlington Ave, Casper, WY 82601, USA
(307) 265-5500 (Phone)
(307) 472-0663 (Fax)
http://www.roughriderelectric.com/

Our systems produce fuel-free, emissions-free electricity to industry nationwide. The company's proven, patented Twin Screw Expander enables its line of Recovered Energy Generators to make electricity from waste and geothermal heat or pressure instead of fossil fuel. Flexible and scalable, modular and mobile, this clean technology quickly pays for itself, with reliable electricity allowing industry to eliminate gas-assisted machinary. Application examples include stationary engines, dehydration units, refining and chemical processes, geo-thermal, boiler units and power plants.

---

Ruby Canyon Engineering

Ronald Collings (rcollings@rubycanyoneng.com)
743 Horizon Ct., Grand Junction, CO 81506, USA
(970) 241-9298 (Phone)
http://www.rubycanyoneng.com

Founded in Grand Junction, Colorado, in 2005, Ruby Canyon Engineering Inc. is an organization dedicated to facilitating greenhouse gas emission reduction projects. As an ANSI accredited GHG verifier and subcontractor to U.S. EPA, RCE is well versed in environmental standards, GHG regulation and all aspects of the carbon project cycle. RCE's engineering background in the oil and gas and coal mining sectors provides an understanding of how methane emissions can be economically reduced through the appropriate implementation of technologies in these two sectors, particularly with methane-to-energy projects.

---

Top of Page

- S -

Safe Sample Extractor

Kim Voisin (Kfv4square@aol.com)
344 Bayou Blue Road, Houma, LA 70364, USA
(985) 688-3738 (Phone)
(985) 594-8884 (Fax)
http://www.safesampleExtractor.org

Stops gas from going into the air when taking fluid samples for daily testing. Saves money and makes a cleaner and safer work area. See Web page for details.

---

SCS Engineers

Lucas Marsalek (lmarsalek@scsengineers.com)
2601 Skyway Drive Suite A1, Santa Maria, CA 93455, USA
(805) 346-6591 (Phone)
(805) 346-6127 (Fax)
http://www.scsengineers.com

Fugitive Air Emissions Monitoring.

---

SCV Environmental

Steven Vaughn (scvenv@aol.com)
604 E 6th Street, Bishop, TX 78343, USA
(361) 720-0361 (Phone)

Environmental remediation, Phase I, II, III Assessment, Hydrocarbon stream destruction, Dual-Phase Extraction, SVE Technology, Monitoring well delineation, Environmental screening and sampling, Waste disposal

---

Smart Environmental Technologies

Brent Pruet (brentpruet@smartldar.com)
905 Gemini, Houston, TX 77058, USA
(281) 990-0623 (Phone)
(281) 488-9729 (Fax)
http://www.iprems.com/

Our company is dedicated to providing state-of-the-art leak detection products to the Petrochemical, Refining, Pharmaceutical, Gas Transmission, and Electric Utility industries. These products include the SmartIR™ infrared gas camera and the Leaders® Fugitive Emissions LDAR Management Software. The SmartIR infrared gas camera meets the needs of emerging "Smart LDAR" as the alternative to Method 21 monitoring for Petrochemical, Refining, and Pharmaceutical facilities. In the Gas Transmission industry, SmartIR also replaces Flame Ionization (FI) and Combustible Gas Indicator (CGI) monitoring for gas leaks from the drilling platform to the home gas meter. For your fugitive emissions program, the Leaders Fugitive Emissions LDAR Management Software has been proven to provide you complete control, program accountability, total quality control and assurance, as well as absolute regulatory compliance. We combine the Leaders Fugitive Emissions LDAR Management Software and the SmartIR infrared gas camera, to provide the only patented wireless interface, which sends the camera's video wirelessly to the Symbol MC9090 handheld computer for easy upload and video storage.

---

Solar Injection Systems, Inc.

Mike Fourqurean (mikef@sunpumper.com)
PO Box 7805, Midland, TX 79708, USA
(432) 570-8144 (Phone)
(432) 570-8153 (Fax)
http://www.sunpumper.com

Solar Injection Systems, Inc., established in 1992, manufactures Sun Pumper solar powered chemical injection pumps. Over 40,000 of our pumps are in daily services around the world pumping all types of oilfield chemicals. Our Sun Pumper systems are solar sized to meet your injection requirements. “We were green - before green was cool”

---

Solar Turbines

David Schnaars (dave.schnaars@solarturbines.com)
PO Box 85376, San Diego, CA 92186-5376, USA
(858) 694-6632 (Phone)
(858) 694-6715 (Fax)
http://www.solarturbines.com

Gas turbines (1,500-30,000 HP) and centrifugal compressors; turnkey compressor stations; offshore gas compression and gas processing modules; landfill gas compression and power generation installations.

---

Southern Research Institute

Tim Hansen (hansen@southernresearch.org)
5201 International Drive, Durham, NC 27712, USA
(919) 806-3456 (Phone)
http://www.southernresearch.org

Southern Research provides independent, third party technology evaluation and verification services. Southern focuses on identification and evaluation of novel technologies to reduce methane, greenhouse gas, and other pollutant emissions and technologies to reduce energy consumption. Southern performs independent assessments of technology performance, including emissions, energy efficiency, operational performance, and economics.

---

Spectral, Inc.

Robert Stokes (rstokes@spectralcorp.com)
8403 Cross Park Drive, Suite 2F, Austin, TX 78754, USA
(512) 833-0608 (Phone)
(512) 628-3235 (Fax)
http://spectralcorp.com/

Methane Active Laser Gas Detection Systems using both Laser Line-Scan Cameras (LLCs) or Backscatter/Absorption Gas Imaging (BAGI) technologies.

---

Stagirus, Inc.

Marty Sos (msos@stagirus.com)
10955 Westmoor Drive, Suite 400, Westminster, CO 80021, USA
(303) 379-2865 (Phone)
(303) 317-8188 (Fax)
http://www.stagirus.com

The Stagirus S2 Enterprise System is a state-of-the art solution for implementing, automating and managing a DI&M program. S2 Enterprise brings best practices related to DI&M, risk management and compliance into a single integrated system.
*RFID Tags identify components and the data resides in a central database
*Screening data captured in the field is transmitted wirelessly via mobile devices
*Repair priority & economic decisions are processed by the system
*Reports and repair work orders are initiated automatically
*Repeatable DI&M procedures are easily modeled for future implementation

---

Sulphur Experts Inc.

Jamie Swallow (jamie.swallow@sulphurexperts.com)
12 Manning Close N.E, Calgary, Alberta T2E 7N6, Canada
(281) 229-5054 (Phone)
http://www.sulphurexperts.com

Sulphur Experts has been providing solutions to sulphur plant problems for more than 30 years under the internationally-recognized name - Western Research. Sulphur Experts Inc. is an independent process engineering company reflecting our focus on the sulphur plant. The company comprises the same engineers and technologists, products and services previously marketed through the process engineering group of BOVAR Western Research, and has continued the tradition of providing quality process engineering consulting and sulphur plant testing to the oil refining and natural gas processing industries.

---

Sulfur Recovery Engineering Inc.

Don Green (dongreen@sulfurrecovery.com)
#105, 2750 3rd Ave. NE, Calgary, Alberta T2A 2L5, Canada
(403) 226-5951 (Phone)
(403) 226-5953 (Fax)
http://sulfurrecovery.com/

Cut Costs, Reduce Emissions, Optimize Performance. Since 1998, Sulfur Recovery Engineering has helped Refineries, Gas Plants, and Engineering companies worldwide to achieve optimal performance of Sulfur Recovery Units. Services and solutions include Performance Evaluation Testing, Troubleshooting, Shutdown and Start-up Assistance, Capacity and Debottlenecking Studies, Design Consultation, Dynamic and Steady State SRU Modeling, and SRU Training Seminars. Amine consulting, onsite services, and training for operators and engineers are also available.

---

Surefire Burner Management

Matt McEneny (matt.mceneny@surefire-controls.com)
2405 West Aztec Blvd., Aztec, NM 87410, USA
(505) 333-2876 (Phone)
(505) 333-2879 (Fax)
http://www.surefire-controls.com

SureFire offers purpose-built industrial Burner Management Systems. Our BMS eliminates methane and other emissions from burner upsets as well as standing pilot use, while increasing operational safety and revenue. Proven in the Oil and Gas, PetroChem, Treatment, and Emissions Control industries, we offer systems for incinerators, dehydrators, heaters, separators, and many other applications. SureFire products are made in the USA.

---

Top of Page

- T -

TCI USA Inc.

Thomas Mark (NN182BM@aol.com)
8026 S Quince Way, Centennial, CO 80112, USA
(303) 949-7214 (Phone)
(720) 863-2046 (Fax)
http://www.tciusainc.com

TCI USA Inc. is a supplier of low inlet pressure enclosed thermal oxidizers (TOs) used to control methane and VOC emissions from dehydration units and hydrocarbon tanks. The TCI TOs are smokeless, meet BACT requirements, provide up to 99.9% VOC destruction, are light weight, portable, and natural draft. Inlet flow rates from 5 mscf/d to 2 mmscf/d. Inlet pressures from ounces to pounds. Variable flow rates are our specialty.

---

TESCORP

Vince Thomas (m.thomas@tescorp.com)
8525 E 46th St, Tulsa, OK 74147
(918) 665-0031 (Phone)
http://tescorp.com/

TESCORP is a team of engineering and manufacturing experts, celebrating 30 years as the leader in environmental and vapor recovery solutions, specialty compressors, customer service and parts. With headquarters in Tulsa, Oklahoma, TESCORP distributes, fabricates, and services its line of standardized and specialty compression systems stateside and internationally. Fueling the determination of the company is our decades-long commitment to the transfer and safe handling of hydrocarbon and industrial gases through innovative technology.

---

Team Industrial Services

Mike Hebert (mike.hebert@teaminc.com)
200 Hermann Dr., Alvin, TX 77511, USA
(281) 388-5547 or (281) 388-5552 (Phone)
http://www.teamindustrialservices.com

Methane and VOC Leak Detection, Infrared Leak Detection (Alternative Work Practice), Emissions Quantification, Direct Measurement, LDAR programs, Repair of Leaking Equipment.

---

TTE International Inc

David Baskett (Dave@TTEinternational.com)
2320-L Thompson Way, Santa Maria, CA 93455, USA
(805) 925-0999 (Phone)
(805) 925-7671 (Fax)

Energy, mining and technology exports.

---

TXAM Pumps, LLC

Randall Haudek (rhaudek@txampumps.com)
5656 Wheatley St, Houston, TX 77091, USA
(713) 691-0668 (Phone)
(713) 691-2328 (Fax)
http://www.txampumps.com

TXAM manufactures solar powered chemical injection pumps, atomizers and coupon testers used in oil and gas production. The newly redesigned pump isolates chemicals away from the pump housing and motor. Stainless steel wetted parts are used to ensure long-lasting dependability. Control of the frequency and duration of each injection combined with stroke adjustment allow for optimal settings.

---

Top of Page

- U -

Unico, Inc.

Christopher Schmidt (Schmidtc@unicous.com)
3698 Little Cottonwood Lane, Sandy, UT 84092, USA
(801) 942-2500 (Phone)
http://www.unicous.com

Unico, Inc. is a manufacturer of artificial lift equipment and oil & gas automation. We have proven technologies that can control a well that is on Conventional beam, ESP, or PCP wells to reduce the amount of methane gas that is produced up the tubing. We are looking for opportunities to introduce these technologies to the Oil & Gas industry.

---

Unimac LP (An Air Mac Inc. Partner)

Reed Heath (RHeath@UnimacLP.com)
8901 Directors Row, Dallas, TX 75247, USA
(214) 879-1010 (Phone)
(214) 879-1011 (Fax)
http://www.unimaclp.com

Providing custom gas compressor packages and instrument air skids. Main focus is the recovery of hydrocarbons (including methane), volatile organic compounds (VOC), natural gas liquids (NGLs), and hazardous air pollutants (HAP) to reduce production site emissions by more than 95% to meet EPA standards.

---

Untamed Helo Services

Cory Oakes (coakes@untamedhelo.com)
2319 East CR 123, Midland, TX 79706, USA
(432) 269-6200 (Phone)
(432) 684-0950 (Fax)
http://untamedhelo.com/

We are an aerial pipeline inspection company. We utilize optical gas imaging cameras and tuneable diode lasers in tandem with our helicopter. We also transport our helicopter on a trailer to our customers’ locations to keep operating costs low which we then pass along to our customers. Customized reports for several different GIS programs allow us to work hand in hand with our customer to provide the best report possible. We provide immediate feedback to our customers on issues that need immediate attention.

---

Top of Page

- V -

Valerus

Suzanne Ogle (sogle@valerus-co.com)
919 Milam, Ste 1000, Houston, TX 77002, USA
(713) 744-6100 (Phone)
(713) 744-6101 (Fax)
http://www.valerus.com/

Valerus is leading the way in comprehensive worldwide natural gas handling services. We are specialists in natural gas processing, treating and compression. Valerus' product portfolio includes: compression, gas services, production equipment, packaging and manufacturing. Our Carbon-Lite product portfolio brings evironmental sound solutions to typical oil & gas applications.

---

Val-Tex

Jason Councill (help@valtex.com)
10600 Fallstone Rd., Houston, TX 77099, USA
(281) 530-4848 (Phone)
http://www.valtex.com

Manufacture valve lube sealants, Valve Flush, lubrication equipment, fittings, adapters, etc. for preventative maintenance of ball, plug, and gate valves to reduce or eliminate fugitive emissions.

---

Vector Group Inc.

Dan Ward (dan.ward@fogt.com)
10648 West Little York, Suite 100, Houston, TX 77041, USA
(281) 742-7263 (Phone)
http://www.vectortg.com

Vector is an internationally recognized manufacturer of customized compact sealing solutions and subsea applications. Our main products include the SPO compact flange, TECHLOK clamp connector and OPTIMA subsea connector. Vector has an impressive background, international reputation and a well-earned position on top of the global market.

Benefits – leak–free; environmentally friendly; metal to metal seals; substantially reduced weights and dimensions; maintenance free; reduced life cycle costs; safe and cost effective; reduced bolting - cost savings during installation and fabrication.

---

Velocys

Philipp Stratmann (Philipp.Stratmann@velocys.com)
2603 Augusta Drive, Suite 1175, Houston, TX 77057, USA
(713) 275-5840 (Phone)
http://www.velocys.com

Velocys enabled gas-to-liquids (GTL) facilities can deliver greenhouse gas reductions in the oil and gas industry. Velocys technology combines super-active catalysts with intensified reactor systems specifically designed for smaller scale, modular GTL. Natural gas is converted into premium products such as diesel and jet fuel. The Company’s standardized modular plants are easier to ship and faster to install, at lower risk, even in the most remote locations. For example, a 200bpd flare reduction facility, could divert around 2 million standard cubic feet per day of natural gas from flaring.

---

VisionMonitor Software LLC

Max D. Jones (mjones@visionmonitor.com)
11451 Katy Freeway, Houston, TX 77079, USA
(713) 935-0500 ext. 313 (Phone)
http://www.visionmonitor.com

VisionMonitor Software provides data management solutions for methane and greenhouse gas accounting that is uniquely suited for the industry, enabling clients to efficiently and accurately collect, process and report emissions data across remote, disparate operating areas via a MS SharePoint interface.

---

Top of Page

- W -

World Alliance for Decentralized Energy

Jeff Bell (jeff.bell@localpower.org)
1513 16th Street NW, Washington, DC 20036, USA
(202) 667-5600 (Phone)
(202) 315-3719 (Fax)
http://www.localpower.org

The World Alliance for Decentralized Energy (WADE) is a non-profit research, promotion and advocacy organization representing global companies as well as industry and environmental groups. Since 1997, WADE has worked to accelerate the worldwide deployment of decentralized energy systems that deliver substantial economic and environmental benefits. WADE's mission is to increase the market share of decentralized energy (such as gas-fired cogeneration) technologies in the global power mix to create a cost-effective, robust and sustainable electricity system.

---

Weatherford Controlled Pressure Drilling and Testing

Stuart Buckingham (stuart.buckingham@weatherford.com)
5432 US Hwy. 64, Farmington, NM 87402, USA
(505) 793-5115 (Phone)
(505) 325-8893 (Fax)
http://www.weatherford.com/en

Provider and builder of closed loop drilling and completion systems designed to capture natural gas and methane which would otherwise be vented or flared and to inject that gas in to the pipeline. Weatherford has developed this technology in conjunction with major gas producers in the U.S. and internationally. Weatherford is currently operating these systems in coal bed methane wells and deeper shale wells for BP and ConocoPhillips in the southwestern U.S.

---

WeldFit Energy Group

Veda Ford (vford@weldfit.com)
4133 Southerland Rd., Houston, TX 77092
(713) 460-3700 (Phone)
(713) 939-1808 (Fax)
http://www.weldfit.com/

WeldFit specializes in the design, engineering, manufacturing and quality testing of automated pigging systems that can be utilized to perform four separate pigging functions: liquid recovery, cleaning, batching and in-line inspections. The SureLaunchTM automated pigging system can launch any type of pig individually at pre-set launch intervals through the use of a logic-driven control system and an electrical drive system. The horizontally oriented automatic launcher design is loaded with multiple pigs in one loading operation.

---

WellMark

Stephen Lawson (slawson@wellmarkco.com)
1903 SE 29th Street, Oklahoma City, OK 73129, USA
(405) 672-6660 (Phone)
(405) 672-6661 (Fax)
http://www.wellmarkco.com

MIZER® Pilot Valve Low-Bleed Control Conversion Kits. WellMark is exclusively licensed to manufacture and market this remarkable product, which easily and efficiently converts your high-bleed pneumatic controls to low-bleed. WellMark also offers a complete line of Pneumatic & Electric Level Controls, Safety Relief Valves, Motor Valves, Pressure Regulators, and Backpressure Regulators.

---

Whirlwind Methane Recovery Systems

Russ Hogue (chogue@whirlwind.us.com)
3600 Bent Cedar Trail, Edmond, OK 73034-2049, USA
(405) 282-8590 (Phone)
405-282-8591 (Fax)
http://www.whirlwind.us.com

Whirlwind Methane Recovery Systems provides reliable and economical methane emission solutions for the oil and gas producer, specializing in onshore and offshore wellhead applications. Equipment available from 5 to 500 BHP.

---

Top of Page

- Z -

Zahroof Valves Inc

Anthony Gioffredi (agioffredi@zahroofvalves.com)
8615-A Jackrabbit Rd, Houston, TX 77095, USA
(713) 554-2678 (Phone)
http://www.zahroofvalves.com/

Zahroof Valves Inc. is focused on improving the performance and reducing emissions of reciprocating compressors with its game changing StraightFlo Valve. The SFV is a direct replacement for all manufacturers’ compressor valves and can be operated in various compression applications. This patented technology delivers a step change in reciprocating compressor performance, serviceability and reliability while reducing gas emissions. As a result, ZVI offers a best in industry guarantee of a 10 year warranty on the valve housing; while providing the customer with an ROI of less than one year.

---

Zalco Laboratories, Inc.

Mark Hoy (mhoy@zalcolabs.com)
4309 Armour Avenue, Bakersfield, CA 93308, USA
(661) 395-0539 (Phone)
(661) 395-3069 (Fax)
http://www.zalcolabs.com

Zalco is a full service analytical laboratory offering both laboratory and field testing services. All field personnel are trained in proper sampling and testing techniques applicable for the determination of leaks from process equipment. Additionally, field personnel receive regular training in Occupational Safety and Health (OSHA) certified courses and site-specific safety plans.

---

Zeeco, Inc.

Daniel Caho (Dan_Caho@zeeco.com)
22151 E. 91st Street S., Broken Arrow, OK 74014, USA
(918) 258-8551 (Phone)
(918) 251-5519 (Fax)
http://www.zeeco.com

Zeeco is the only full-line supplier to design and manufacture process, power, duct and packaged burners; gas and liquid flares; rentals; flare gas recovery systems; thermal oxidizers and incinerators; vapor control equipment; pilots and ignitors; and scanners, monitors, controls and management systems.

Top of Page