Kraft, Soda, Sulfite, and Stand-Alone Semichemical Pulp Mills (MACT II): National Emission Standards for Hazardous Air Pollutants (NESHAP) for Chemical Recovery Combustion Sources
Rule Summary
The chemical recovery process at pulp mills involves the recovery of chemicals in the spent cooking liquor, reconstitution of those chemicals, and the generation of energy from the incineration of the organic residuals. This subpart regulates the emissions from the pulp mill combustion sources, which are recovery furnaces, smelt dissolving tanks, and lime kilns.
These standards do not address emissions from mills that chemically pulp wood using kraft, semi-chemical, sulfite, or soda processes that are referred to as MACT I mills. Mills that mechanically pulp wood, or that pulp secondary fiber or non-wood fibers, or that produce paper or paperboard from purchased pulp are referred to as MACT III mills, and these two MACTs are regulated under a seperate NESHAP.
The National Emissions Standards for Hazardous Air Pollutants (NESHAP) for the pulp mill combustion sources was originally proposed in 1998 and promulgated in 2001. In these actions, the EPA identified Hazardous Air Pollutants (HAP) metals as the HAP emitted in the largest quantity and regulated them through a particulate matter surrogate. Gaseous organic HAP were also regulated for new sources.
See the regulations in the section below for more details.
Subpart MM RTR
Subpart MM RTR Supporting Documentation
Submitting emissions data corrections to the risk modeling file
Rule History
12/30/2016 - Proposed Amendments; Risk and Technology Review
05/06/2004 - Final Rule; technical corrections
07/18/2003 - Final Rule; amendments
05/08/2003 - Correcting administrative amendments; change in effective date
02/18/2003 - Proposed Rule & Direct Final Rule
08/06/2001 - Federal Register Correction
07/19/2001 - Final Rule; technical corrections
01/12/2001 - Final Rule
04/15/1998 - Proposed Rule
Additional Resources
Fact Sheet: December 2016 Proposed Amendments; Risk and Technology Review
Chemcial Recovery Combustion Sources at U.S. Sulfite Pulp Mills
Technical Support Document: Chemical Recovery Combustion Sources at Kraft and Soda Pulp Mills
WATER9 is a Windows based computer program for estimating air emissions of individual waste constituents in wastewater/waste. Further information or a copy of the WATER 9 can be obtained from EPA. You can also contact the Air Emissions Model Hotline at (919) 541-5610 for support or more information about this model.
Pulp and paper manufacturing is subject to the Greenhouse Gas Reporting Program. Information regarding available and emerging technologies for reducing greenhouse gas emissions from pulp and paper manufacturing can be found here.
Related Rules
MACT I & III Pulp and Paper regulations
Kraft Pulp Mills: New Source Performance Standards (NSPS)
Pulp, Paper, and Paper Board Point Source Category Effluent Guidelines and Standards
Compliance
Applicability Determination Index (ADI). The ADI is maintained by EPA's Office of Enforcement and Compliance Assurance (OECA) and provides a data base of memoranda dealing with applicability issues. The database is searchable by Subpart.