Stormwater Discharges from Industrial Activities
- NPDES Security Enhancement: Details for MSGP Certifiers(5 pp, 214 K)
- NPDES Security Enhancement: Details for MSGP Preparers and Duly Authorized Representative for Certifiers (DARCs)(3 pp, 135 K)
Material handling and storage, equipment maintenance and cleaning, and other activities at industrial facilities are often exposed to the weather. Runoff from rainfall or snowmelt that comes in contact with these activities can pick up pollutants, and transport them directly to a nearby river, lake, or coastal water or indirectly via a storm sewer and degrade water quality.
Federal regulations at 40 CFR 122.26(b)(14)(i)-(xi) require stormwater discharges associated with specific categories of industrial activity to be covered under NPDES permits (unless otherwise excluded). One of the categories—construction sites that disturb five acres or more—is generally permitted separately because of the significant differences between those activities and the others. The 11 categories of regulated industrial activities are:
- Category One (i): Facilities subject to federal stormwater effluent discharge standards at 40 CFR Parts 405-471
- Category Two (ii): Heavy manufacturing (e.g., paper mills, chemical plants, petroleum refineries, steel mills and foundries)
- Category Three (iii): Coal and mineral mining and oil and gas exploration and processing
- Category Four (iv): Hazardous waste treatment, storage, and disposal facilities
- Category Five (v): Landfills, land application sites, and open dumps with industrial wastes
- Category Six (vi): Metal scrapyards, salvage yards, automobile junkyards, and battery reclaimers
- Category Seven (vii): Steam electric power generating plants
- Category Eight (viii): Transportation facilities that have vehicle maintenance, equipment cleaning, or airport deicing operations
- Category Nine (ix): Treatment works treating domestic sewage with a design flow of 1 million gallons a day or more
- Category Ten (x): Construction sites that disturb 5 acres or more (permitted separately)
Category Eleven (xi): Light manufacturing (e.g., food processing, printing and publishing, electronic and other electrical equipment manufacturing, public warehousing and storage)
EPA has authorized many states to administer the NPDES stormwater permitting program. Most industrial facilities will need to obtain NPDES permit coverage through their state. EPA remains the permitting authority in a few states, most territories, and most Indian country. For industrial facilities located in those areas, permit coverage is available under EPA’s 2015 Multi-Sector General Permit (MSGP).
- Authorization Status for EPA's Construction and Industrial Stormwater Programs – Find out if EPA or your state is the permitting authority for industrial activities.
EPA's 2015 Multi-Sector General Permit (MSGP)
- Final 2015 MSGP, Previous MSGP Versions, and Related Documents
- Summary of 2015 MSGP Reporting Requirements and Deadlines
EPA’s 1990 stormwater regulations established NPDES permit requirements for industrial stormwater discharges, and the Agency issued the first Multi-Sector General Permit (MSGP) for those facilities in 1995. The current MSGP went into effect on June 4, 2015.
The EPA’s 2015 MSGP applies in areas of the country where EPA is the NPDES permitting authority and has made the permit available for coverage. These areas include:
- Four states: Idaho, Massachusetts, New Hampshire, and New Mexico,
- The District of Columbia,
- All U.S. territories except for the Virgin Islands,
- Federally operated facilities in Colorado, Delaware, Vermont, and Washington,
- Most Indian country lands, and
- Other designated activities in specific states (e.g., oil and gas activities in Texas and Oklahoma).
- EPA’s Final 2015 Multi-Sector General Permit
- Final 2015 MSGP Fact Sheet (includes a detailed summary of and factual basis for permit provisions)
- Federal Register Notice for Issuance of Final 2015 MSGP
- Previous Versions of EPA’s MSGP
|Report||Frequency||Deadline||How to Submit|
|Endangered and Threatened Species Appendix E Criterion C Eligibility Form
Applies only if you are seeking coverage under Part 18.104.22.168 eligibility Criterion C (i.e., your facility has threatened or endangered species or critical habitat in its “action area”). See MSGP Appendix E and Threatened and Endangered Species Eligibility Procedures Web page for information.
|Once.||At least 30 days prior to submitting the NOI for permit coverage.||E-mail to firstname.lastname@example.org.|
|Benchmark Monitoring Report
See Part 8 of the MSGP for sector-specific requirements.
|Benchmark monitoring requirements commence in the first full quarter following either September 2, 2015, or your date of discharge authorization, whichever is later. Continue benchmark monitoring quarterly until you either qualify for a monitoring reduction or fulfill the monitoring requirements specified in the permit.||Within 30 days of receiving all laboratory results for sample(s) taken during the quarter.||Electronically using NetDMR.|
|Impaired Waters Monitoring Report
Applies if your facility discharges to an impaired water body without a total maximum daily load (TMDL).
Note: If your facility discharges to a water body with a TMDL, the EPA regional office will inform you of any applicable monitoring requirements.
|A minimum of once per year.||Within 30 days of receiving laboratory results.||Electronically using NetDMR.|
|Numeric Effluent Limitations Monitoring Report
Applies only to some facilities in sectors A, C, D, E, J, K, L, O and S. See Table 1-1 of the MSGP and Part 8.
|If no exceedance: A minimum of once per year.
If in exceedance:
|Within 30 days of receiving laboratory results.||Electronically using NetDMR.|
|Numeric Effluent Limitations Exceedance Report||If 30-day follow-up monitoring exceeds an applicable effluent limit. See Part 22.214.171.124 and Part 7.6 of the permit.||Within 30 days of receiving laboratory results.||Directly to the EPA regional office listed in Part 7.9.1 of the permit.|
|Annual Report||Once per year for each year of permit coverage.||No later than January 30.||Electronically using NeT-MSGP. How to complete the annual report Exit|
|Stormwater Pollution Prevention Plan (SWPPP) Update||At least once per year.||No later than 45 days after conducting the final routine inspection for the year.||The MSGP requires the SWPPP to be publicly available.
Either you can post the SWPPP to the Web, or include the specified SWPPP information on your NOI form.
|NOI Updates||As information changes.||As soon as information changes.||Electronically using NeT-MSGP.|
|Noncompliance that could endanger health or the environment||Verbally within 24 hours from the time you became aware of the circumstances, with a written submission within 5 days from the time you became aware of the circumstances.||As necessary.||Directly to the EPA Regional Office listed in Part 7.9.1) of the permit.|
Discharge Authorization under EPA's 2015 Multi-Sector General Permit (MSGP)
In general, you need MSGP coverage if you are an operator of a regulated industrial activity that discharges stormwater to waters of the U.S. in an area where EPA is the NPDES permitting authority and has made the permit available for coverage.
Determine whether you are eligible for coverage under this permit. Before submitting your Notice of Intent (NOI), the form you file to obtain coverage under the MSGP, you must:
- Follow all required procedures for determining your eligibility.
- All dischargers must:
- Follow the procedures in Appendix E - Procedures Relating to Endangered Species Protection. (The eligibility requirements have been revised from the 2008 MSGP).
- Follow the procedures in Appendix F - Procedures Relating to Historic Properties Preservation.
- If you are a facility in EPA region 10 (i.e., Alaska, Idaho, Oregon, and Washington), determine whether you discharge to a federal Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) site listed in Appendix P - List of Federal CERCLA Sites. If you do, you must notify EPA region 10, which will determine if you are eligible for permit coverage.
- New dischargers and new sources must:
- If you discharge to an impaired waterbody, meet the requirements of MSGP Part 126.96.36.199.
Note: Some dischargers will be required to provide information to the EPA Regional Office documenting that pollutants for which the water body is impaired are not present at the site or that discharges will not cause or contribute to an exceedance of a water quality standard.
- Determine whether you discharge to a Tier 3 waterbody (i.e., an outstanding national resource water). If you do, you must obtain coverage under an individual permit.
- If you discharge to an impaired waterbody, meet the requirements of MSGP Part 188.8.131.52.
- All dischargers must:
- Develop a stormwater pollution prevention plan (SWPPP), or update your existing SWPPP consistent with the requirements in Part 5 of the MSGP.
Submit an NOI to EPA using the NPDES eReporting Tool (NeT) for the MSGP.
You are authorized to discharge 30 days after submitting your complete NOI unless EPA notifies you that your authorization has been denied or delayed.
To be covered under the 2015 MSGP, you must submit your NOI by the deadline specified in the table. The NOI certifies to EPA that you are eligible for coverage and provides information on your facility’s industrial activities and discharges.
Deadlines for Submitting NOIs
Operator of industrial activities authorized for coverage under the 2008 MSGP.
No later than September 2, 2015, unless EPA notifies you that your deadline is extended.
For operators of industrial activities located in the State of Idaho (except Indian country) or on Spokane Tribe of Indians lands, no later than November 10, 2015, unless EPA notifies you that your deadline is extended
Operator of industrial activities that:
As soon as possible, but no later than September 2, 2015, unless EPA notifies you that your deadline is extended.
Federal operator of industrial activities that:
As soon as possible, but no later than Oct. 19, 2015, unless EPA notifies you that your deadline is extended.
Operator of industrial activities that:
As soon as possible, but no later than Nov. 10, 2015, unless EPA notifies you that your deadline is extended
A minimum of 30 days before commencing discharge in accordance with the terms of the 2015 MSGP.
New operator of existing industrial activities with discharges previously authorized under the 2015 MSGP.
A minimum of 30 days before the date of transfer of control to the new operator.
Operator of industrial activities that:
Immediately, to minimize the amount of time discharges from the facility continue unauthorized.
MSGP coverage begins 30 days after EPA notifies you that it has received your complete NOI, unless the Agency notifies you that your authorization has been denied or delayed.
Multi-Sector General Permit (MSGP) Threatened and Endangered Species Eligibility
Part 184.108.40.206 of the 2015 MSGP requires you to determine your eligibility with regard to protection of threatened and endangered species and critical habitat. You must make the determination before you submit a notice of intent (NOI) for permit coverage.
Determining your Endangered Species Act (ESA) eligibility
Appendix E - Procedures Relating to Endangered Species Protection - follow these procedures to assess the effects of your discharges and discharge-related activities on threatened and endangered species and critical habitat. Include all documentation supporting your eligibility in your stormwater pollution prevention plan (SWPPP).
Review this summary of the required steps in Appendix E:
Step 1. Determine if you can meet the eligibility requirements of criterion B, D, or E.
- Criterion B: Your industrial discharges and discharge-related activities were already addressed in another operator’s valid certification of eligibility for your action area under the 2015 MSGP, and there is no reason to believe that federally listed species or designated critical habitat not considered in the prior certification may be present in your “action area” (e.g., due to a new threatened or endangered species listing or critical habitat designation).
“Action area” is defined as “all areas to be affected directly or indirectly by the federal action and not merely the immediate area involved in the action.”
Note: You cannot select this eligibility criterion based upon a determination under an earlier version of the MSGP because revisions have been made to the eligibility requirements.
- Criterion D: A separate Endangered Species Act (ESA) section seven consultation was completed that addresses the effects of your facility’s discharges and discharge-related activities.
- Criterion E: Your facility’s activities are the subject of a permit under section 10 of the ESA that addresses the effects of your facility’s discharges and discharge-related activities.
If you meet criteria B, D, or E, skip to document eligibility on NOI and SWPPP.
If you do not meet criteria B, D, or E, continue to step 2.
Step 2. Determine the extent of your facility’s action area. Consider the following in determining the action area:
- Include all receiving waterbodies that could receive pollutants from your facility. Discharges of pollutants into downstream areas can expand the action area well beyond the footprint of your facility and the discharge point(s). Account for controls you will implement to minimize pollutants and characteristics of the receiving waterbody (e.g., perennial, intermittent, ephemeral) in determining the extent of physical, chemical and biotic effects of the discharges.
- Account for discharge-related activities, which include the siting, construction and operation of stormwater controls to control, reduce or prevent pollutants from being discharged. For example, any new or modified stormwater controls that will create noise—and any disturbances associated with construction of controls—are part of your action area.
Step 3. Determine if threatened species, endangered species, or critical habitat are present in your facility’s action area.
You must refer to National Marine Fisheries Service (NMFS) and U.S. Fish and Wildlife Service (FWS) listed species information:
- Refer to the following maps to determine if NMFS-listed species are potentially present:
- IPaC, Information for Planning and Conservation - access the FWS’s online mapping tool and follow these steps to determine if FWS-listed species are potentially present:
- Select get started.
- Select enter project location.
- Use an address, city name or other location to zoom into your action area.
- Use the zoom feature to see the entire extent of your action area on the screen.
- Use one of the mapping features (e.g., polygon or line feature) to draw your action area.
- For the aquatic portion of your action area, trace the waterbody(ies) with the tool to characterize your action area.
- If there will be any discharge-related activities associated with your 2015 MSGP coverage, or if there is some aspect of your discharge that would potentially result in effects to terrestrial species, include the corresponding upland areas within your action area.
- When you are finished, press continue.
- Select request an official species list.
- Complete the fields on the official species list request page, and include “(MSGP)” at the end of the project description.
- For classification, select “water quality modification”.
- Select the appropriate requesting agency/organization type. (For most operators, this should be “other”.)
- Submit the request to acquire an official species list, which should show listed species as well as any designated critical habitat that are present in your action area. If a link to an official species list is not available on the page:
- follow the Web link of the office(s) indicated; or
- contact the office directly if a Web link is not shown.
FWS New England Field Office’s guidance - facilities located in EPA region 1 may alternatively follow this guidance for determining the presence of FWS species in your action area.
Note: If, after following NMFS and FWS guidance, the only listed species potentially present is the northern long-eared bat, and your facility will not be conducting discharge-related activities under your 2015 MSGP coverage, you are eligible for MSGP coverage under Criterion A and a Criterion C Eligibility Form is not required.
- If you determine that no threatened or endangered species and no critical habitat are present in your facility’s action area, you are eligible for MSGP coverage under criterion A. Skip to Document eligibility on NOI and SWPPP.
- If you determine that threatened or endangered species and no critical habitat are present in your facility’s action area, continue to completing the criterion C eligibility form.
Completing the Criterion C Eligibility Form
If you determined that threatened or endangered species or critical habitat are present in your facility’s action area, you must submit a Criterion C eligibility form from MSGP Appendix E to EPA to email@example.com. You must submit the form at least 30 days before submitting your NOI for permit coverage. The form must document:
- threatened and endangered species in the action area,
- potential stressors to species from pollutants in stormwater discharges, and
- controls that will be implemented to avoid adverse effects.
After you submit this form, EPA may contact you with additional measures necessary to ensure your discharges and discharge-related activities are unlikely to cause adverse effects on threatened or endangered species or critical habitat. If you do not hear anything from EPA, you are eligible to submit your NOI under Criterion C 30 days after submitting your completed form.
For all eligibility criteria (criteria A, B, C, D, and E):
- identify the eligibility criterion you selected on your NOI for permit coverage and
- include documentation supporting your eligibility determination in your SWPPP.
Go to NetMSGP to complete your NOI for permit coverage.
For questions about meeting the MSGP requirements in part 220.127.116.11 and Appendix E, contact firstname.lastname@example.org or your EPA regional permitting authority.
EPA revised the requirements for threatened and endangered species and critical habitat protection eligibility under the 2015 MSGP as a result of its consultation with FWS and NMFS under section 7 of the ESA.
U.S. Fish and Wildlife Service
National Marine Fisheries Service
Under section 9 (a)(1)(B) of the Endangered Species Act, with respect to any endangered species of fish or wildlife listed pursuant to section 4 of this Act, it is unlawful for any person subject to the jurisdiction of the United States to take any such species within the United States or the territorial sea of the United States. To ensure consistency with the conditional take exemption associated with the MSGP, MSGP-authorized dischargers shall notify the nearest National Marine Fisheries Service (NMFS) Regional Office within three days upon finding any dead, injured, or sick, specimen, nest, and/or egg(s) of endangered or threatened species under NMFS jurisdiction that appears to have been harmed by MSGP-authorized discharges into Waters of the United States. In addition, notify the National Marine Fisheries Service, Office of Protected Resources at (301) 427-8400 and EPA at email@example.com. Include the date, time, and precise location of the injured animal, carcass, nest, and/or egg and any other pertinent information in your notification. Leave the plant or animal alone, make note of any circumstances likely causing the death or injury, note the location and number of individuals involved and, if possible, take photographs. The finder may be asked to carry out instructions provided by NMFS to collect specimens or take other measures to ensure that evidence intrinsic to the specimen is preserved. Care should be taken in handling sick or injured specimens to preserve biological materials in the best possible state for later analysis of cause of death, if that occurs.
Electronic Reporting Under the 2015 EPA Multi-Sector General Permit (MSGP)
EPA requires industrial stormwater operators to submit the following 2015 MSGP forms electronically:
- Notices of intent (NOIs),
- Annual reports,
- Notices of Termination (NOTs),
- Discharge Monitoring Reports (DMRs), and
- No Exposure Certifications (NOEs).
To electronically prepare and submit your forms under the 2015 MSGP, use:
- NeT-MSGP – the NPDES eReporting tool for NOIs, annual reports, NOTs, and NOEs, and
- NetDMR – the NPDES eReporting tool for DMRs. If your EPA regional office has granted you an electronic reporting waiver, you can mail the paper forms provided in the 2015 MSGP.
Note for Existing Dischargers: If you are an existing discharger covered under the 2008 MSGP, EPA requires you to submit a new NOI for coverage under the 2015 MSGP using NeT-MSGP.
- You are not required to submit an NOT to terminate coverage under the 2008 MSGP.
- If your facility no longer needs industrial stormwater permit coverage, you are not required to submit an NOI for coverage under the 2015 MSGP. However, you should terminate coverage under the 2008 MSGP either electronically using the SWENOI system (if your original NOI was submitted electronically) or by submitting a paper NOT form.
NeT-MSGP is accessed through EPA’s Central Data Exchange (CDX).
Register your CDX account to NeT-MSGP
- If you do not have a CDX account, create a new account registered to the NeT-MSGP program.
- If you already have a CDX account, register your account to the NeT-MSGP program.
Once your CDX account is registered to the NeT-MSGP program service, you can click this NeT logo to access the system:
Click on your role on the MyCDX screen to launch NeT-MSGP (see Role in the red box below).
2015 MSGP Signature Agreements
If you are registered in NeT-MSGP as a Certifier or Duly Authorized Representative of Certifier, you are required to sign an electronic signature agreement for identity verification.
You can sign the agreement:
- electronically or
- in paper form.
Mail your signed paper agreement to one of the following addresses for account approval:
- Facilities in EPA Region 1
U.S. Environmental Protection Agency, Region 1
Stormwater & Construction Permits Section
5 Post Office Square, Ste. 100 (OEP06-1)
Boston, MA 02109-3912
- All Other Facilities
- For Regular U.S. Mail Delivery:
Stormwater Notice Processing Center
Mail Code 4203M, ATTN: 2015 MSGP Signature Agreement
1200 Pennsylvania Avenue, NW
Washington, DC 20460
- For Overnight/Express U.S. Mail Delivery:
Stormwater Notice Processing Center
William Jefferson Clinton East Building – Room 7420
ATTN: 2015 MSGP Signature Agreement
U.S. EPA 1201 Constitution Avenue, NW
Washington, DC 20004
- For Regular U.S. Mail Delivery:
EPA requires operators to use NetDMR to electronically prepare and submit all DMRs under the 2015 MSGP.
NetDMR is separate from NeT-MSGP and requires separate registration.
Register for NetDMR
- Access the NetDMR homepage.
- Select your EPA regional regulatory authority, and click on the link to register for a new account.
Note: If you are registering for a Signatory role—so you can electronically sign and submit DMRs—you must mail a signed subscriber agreement to your NetDMR EPA regional regulatory authority before you access the system.
Reporting Changes in Monitoring Requirements
NetDMR automatically populates your electronic DMR form with monitoring parameters and frequency from information submitted on your NOI form (i.e., industrial sector(s), discharges to impaired waters, applicable numeric effluent limits). It also will update your form as you report changes to your monitoring requirements.
EPA requires you to report the following changes to your monitoring schedule by submitting a Change NOI form in NeT-MSGP:
- For all parameters, when benchmark monitoring is no longer required.
- For all parameters, when monitoring of impaired waters is no longer required.
- When 30-day follow-up monitoring is required because of a numeric effluent limit exceedance.
- For Sector G only, when discharges from waste rock and overburden piles have exceeded benchmark values.
You no longer are required to report monitoring results using NetDMR once you have fulfilled your monitoring requirements for the permit term.
You are required to continue reporting your results using NetDMR if you have only partially fulfilled your benchmark and/or impaired waters monitoring requirements; for example:
- Your four-quarter average is below the benchmark for some but not all parameters, or
- You detected some—but not all—impairment pollutants.
For any monitoring parameters you have fulfilled, you must report a “no discharge.” For other benchmark monitoring schedule changes, or if there are any errors with the parameters and monitoring frequency on your DMR form, contact firstname.lastname@example.org or call 866-352-7755 between 8 a.m.–5 p.m. ET to request changes to your DMR form.
- NeT Quick Start Guide —a comprehensive guide that covers NeT registration and how to prepare, sign and submit NOIs, annual reports, NOT, and NOE forms.
- NetDMR training Exit
- How to complete the annual report Exit
- For NOIs submitted under the 2008 MSGP and NOEs submitted before June 4, 2015, go to the 2008 MSGP search page.
- For NOIs submitted under the 2015 MSGP and NOEs submitted on or after June 4, 2015, go to the ECHO search page.
Industrial Stormwater Fact Sheet Series and Guidance
EPA has developed a fact sheet for each of the 29 industrial sectors regulated by the MSGP. Each fact sheet describes the types of facilities included in the sector, typical pollutants associated with the sector, and types of stormwater control measures used to minimize the discharge of the pollutants.
- Sector A: Timber Products Facilities
- Sector B: Paper and Allied Products Manufacturing Facilities
- Sector C: Chemical and Allied Products Manufacturing and Refining
- Sector D: Asphalt Paving and Roofing Materials and Manufacturers and Lubricant Manufacturers
- Sector E: Glass, Clay, Cement, Concrete, and Gypsum Product Manufacturing Facilities
- Sector F: Primary Metals Facilities
- Sector G: Metal Mining (Ore Mining and Dressing) Facilities
- Sector H: Coal Mines and Coal Mining-Related Facilities
- Sector I: Oil and Gas Extraction Facilities
- Sector J: Mineral Mining and Processing Facilities
- Sector K: Hazardous Waste Treatment, Storage, or Disposal Facilities
- Sector L: Landfills and Land Application Sites
- Sector M: Automobile Salvage Yards
- Sector N: Scrap Recycling and Waste Recycling Facilities
- Sector O: Steam Electric Power Generating Facilities, including Coal Handling Areas
- Sector P: Motor Freight Transportation Facilities, Passenger Transportation Facilities, Petroleum Bulk Oil Stations and Terminals, Rail Transportation Facilities, and United States Postal Service Transportation Facilities
- Sector Q: Water Transportation Facilities with Vehicle Maintenance Shops and/or Equipment Cleaning Operations
- Sector R: Ship and Boat Building or Repair Yards
- Sector S: Vehicle Maintenance Areas, Equipment Cleaning Areas, or Deicing Areas Located at Air Transportation Facilities
- Sector T: Treatment Works
- Sector U: Food and Kindred Products Facilities
- Sector V: Textile Mills, Apparel, and Other Fabric Products Manufacturing Facilities
- Sector W: Wood and Metal Furniture and Fixture Manufacturing Facilities
- Sector X: Printing and Publishing Facilities
- Sector Y: Rubber, Miscellaneous Plastic Products, and Miscellaneous Manufacturing Industries
- Sector Z: Leather Tanning and Finishing Facilities
- Sector AA: Fabricated Metal Products Manufacturing Facilities
- Sector AB: Transportation Equipment, Industrial, or Commercial Machinery Manufacturing Facilities
- Sector AC: Electronic and Electrical Equipment and Components, Photographic, and Optical Goods Manufacturing Facilities
- Industrial SWPPP Guidance —Provides guidance on developing a SWPPP that meets MSGP requirements.
- EPA Industrial SWPPP Template(29 pp, 152 K)
(Word version) —Provides a template that industrial facilities can use to create their SWPPPs.
Note: All facilities must have a SWPPP completed before submitting their NOI for coverage under the 2015 MSGP.
- Additional MSGP Documentation Template(22 pp, 102 K) —Provides a form for keeping records on monitoring, inspection, maintenance, visual evaluation and corrective action activities.
- Industrial Stormwater Monitoring and Sampling Guide —Explains how to conduct visual and analytical monitoring of stormwater discharges. Can be used by facilities required to comply with MSGP’s monitoring requirements as well as facilities subject to state-issued industrial stormwater permits.
- EPA Region 10 Questions and Answers Regarding the MSGP —Provides answers to commonly asked questions in EPA region 10 (Alaska, Idaho, Oregon, and Washington).
- Industrial Stormwater Permit Guide Exit —Explains the federal stormwater regulations for businesses and the available permitting and waiver options. Discusses types of stormwater controls and includes a photo gallery that documents compliant and noncompliant situations.
- Approved or Established TMDLs -- Provides links to sources and program contacts related to approved or established TMDLs for waterbodies located in jurisdictions covered under the Multi-Sector General Permit (MSGP).
- NPDES Compliance Monitoring Strategy - outlines inspection and compliance goals for the entire NPDES program, including stormwater. This new strategy, which takes effect in 2009, places increased emphasis on wet weather issues, particularly stormwater sources, and sets ambitious targets for audits and inspections of Phase I and II MS4s, construction sites, and industrial facilities.
Conditional “No Exposure” Exclusion
An industrial facility with its industrial materials and activities protected by a storm resistant shelter to prevent exposure to rain, snow, snowmelt, and/or runoff is eligible for an exemption from NPDES industrial stormwater permit requirements. Industrial materials and activities include:
- material handling equipment and activities,
- industrial machinery,
- raw materials,
- intermediate and final products,
- by-products, and
- waste products.
The conditional no exposure exclusion applies to 10 of the 11 categories of stormwater discharges from regulated industrial activities:
- Category One: Facilities subject to federal stormwater effluent discharge standards in 40 CFR Parts 405-471
- Category Two: Heavy manufacturing (e.g., paper mills, chemical plants, petroleum refineries, and steel mills and foundries)
- Category Three: Coal and mineral mining, and oil and gas exploration and processing
- Category Four: Hazardous waste treatment, storage or disposal facilities
- Category Five: Landfills, land application sites, and open dumps with industrial wastes
- Category Six: Metal scrapyards, salvage yards, automobile junkyards, and battery reclaimers
- Category Seven: Steam electric power generating plants
- Category Eight: Transportation facilities that have vehicle maintenance, equipment cleaning or airport deicing operations
- Category Nine: Treatment works treating domestic sewage with a design flow of 1 million gallons or more a day
- Category Eleven: Light manufacturing (e.g., food processing, printing and publishing, electronic and other electrical equipment manufacturing, and public warehousing and storage)
The exclusion does not apply to Category Ten, which is stormwater discharges from construction sites that disturb five or more acres. They are permitted separately under the NPDES stormwater program.
No Exposure Certification
A no exposure certification must be provided to the permitting authority for each facility qualifying for the permitting exclusion. In addition, the exclusion from NPDES permitting is available on a facility-wide basis only, not for individual outfalls. To retain the exclusion, you must recertify the condition with the permitting authority at least every five years. If you are in an area where EPA is the permitting authority, you can use the NPDES eReporting Tool for the MSGP (NeT-MSGP) to submit your no exposure certification.
- No Exposure Form (Appendix K of the MSGP)
- Authorization Status for EPA's Construction and Industrial Stormwater Programs – Visit this page to find out whether EPA or your state is the permitting authority for industrial activities.
If any industrial materials or activities are or will be exposed to precipitation, your facility is not eligible for the no exposure exclusion, and you must obtain NPDES stormwater permit coverage.
- Stormwater Phase II Rule: Conditional No Exposure Exclusion for Industrial Activity (Fact Sheet 4.0)
- Guidance Manual for Conditional Exclusion from Stormwater Permitting Based on “No Exposure” of Industrial Activities to Stormwater