Advanced Light-Duty Powertrain and Hybrid Analysis (ALPHA) Tool
- Overview of ALPHA tool
- ALPHA v2.2 Technology Walk Samples
- ALPHA v2.1 Calibration Samples
- ALPHA v2.0 simulation samples
- ALPHA v2.0 peer review
- Publications concerning ALPHA v2.0
- Overview of testing and integration with modeling
- Engine mapping process documents
- ALPHA v1.0
Overview of ALPHA Tool
EPA’s ALPHA tool is a full vehicle simulation tool which estimates the greenhouse gas (GHG) emissions from light-duty vehicle sources. It is a physics-based, forward-looking, full vehicle simulator, capable of simulating various vehicle types and powertrain technologies. Version 2.0 of the ALPHA model has been updated from the previous version to include more realistic vehicle behavior and now includes internal auditing of all energy flows in the model.
ALPHA is being used by EPA to inform the Midterm Evaluation (MTE) of Light-duty Vehicle Standards for Model Years 2022-2025. The MTE will be conducted through a collaborative, data-driven, and transparent process. The documentation of ALPHA on this page is part of EPA’s commitment to transparency in the MTE process. ALPHA is an in-house vehicle simulation tool used by EPA, and is not intended to be a commercial product.
The ALPHA model shares an underlying structure with EPA's Greenhouse Gas Emissions Model (GEM) used for medium- and heavy-duty vehicle compliance calculations. ALPHA is under active development and the versions of the model presented below represent the state of the package at particular points in time.
ALPHA v2.2 Technology Walk Samples
In response to stakeholder comments on the MTE Proposed Determination, EPA utilized a version of ALPHA capable of executing this sample technology walk analysis to further corroborate EPA’s assessment that vehicles equipped with conventional technologies can support compliance with the MY2025 targets without the need for extensive electrification. These ALPHA runs are referenced in the Response to Comments for the Final Determination on the Appropriateness of the Model Year 2022-2025 Light-duty Vehicle Greenhouse Gas Emissions Standards under the Midterm Evaluation.
ALPHA v2.2 Technology Walk Samples (ZIP)(31 MB,
January 2017)
This file contains a series of ALPHA V2.2 simulations (as of 2017.01.12) used to support a sample technology walk analysis as part of the Final Determination Response to Comments. Running this version of ALPHA requires Matlab/Simulink with StateFlow 2016b. For convenience, a plaintext form of the workspace for each ALPHA run is provided in an m-file format. Further details are in the readme.txt file.
ALPHA v2.1 Calibration Samples
EPA is using ALPHA simulation results to inform its on-going calibration of the Lumped Parameter Model (LPM), an EPA desktop computer application that estimates the effectiveness (CO2Reduction) of various technology combinations. A subset of the numerous ALPHA simulation results being studied during the MTE process were identified as key simulations used to inform the calibration of the LPM.
ALPHA v2.1 Calibration Samples (ZIP)(30 MB,
November 2016)
This file contains a series of ALPHA V2.1 simulations (as of 2016.11.18) used to inform the calibration of the Lumped Parameter Model. Running this version of ALPHA requires Matlab/Simulink with StateFlow 2016b. For convenience, a plaintext form of the workspace for each ALPHA run is provided in an m-file format. Further details are in the readme.txt file.
ALPHA v2.0 Simulation Samples
EPA is using ALPHA simulation results to inform its on-going calibration of the Lumped Parameter Model (LPM), an EPA desktop computer application that estimates the effectiveness (CO2 Reduction) of various technology combinations. A subset of the numerous ALPHA simulation results being studied during the MTE process were identified as key simulations used to inform the calibration of the LPM.
- ALPHA v2.0 Simulation Samples (ZIP)(1 pg, 4 MB,
July 2016)
This file contains a series of ALPHA V2.0 simulations (as of 2016.07.07) of the same type used to inform the calibration of the Lumped Parameter Model.
Running this version of ALPHA requires Matlab/Simulink with StateFlow 2014a. For convenience, a plaintext form of the workspace for each ALPHA run is provided in an m-file format. Further details are in the readme.txt file.
ALPHA v2.0 Peer Review
EPA engaged ICF International to perform a peer review of the ALPHA Full Vehicle Simulation Model. This peer review process was carried out under EPA’s peer review guidelines. The entire model and all subsystems were unlocked for complete transparency. A number of independent subject matter experts provided reviews and comments on the methodologies used in the model.
-
Peer Review of ALPHA Full Vehicle Simulation Model (PDF)(59 pp, 567 K, EPA-420-R-16-013, October 2016, About PDF)
-
ALPHA v2.0 Peer Review (ZIP)(1 pg, 1 MB, May 2016)
This file contains the files provided to peer reviewers for ALPHA v2.0 (as of 2016.05.05).
Running the peer reviewed version of ALPHA requires Matlab/Simulink with StateFlow 2014a. Further details are in the readme.txt file.
Publications Concerning ALPHA v2.0
Throughout the MTE process, EPA’s goal is to publish as much of our research as possible in peer-reviewed technical papers and journals. These publications describe in more detail the development and use of the ALPHA model.
- "Estimating GHG Reduction from Combinations of Current Best-Available and Future Powertrain and Vehicle Technologies for a Midsized Car Using EPA's ALPHA Model," SAE Technical Paper 2016-01-0910, 2016, doi:10.4271/2016-01-0910, Kargul, J., Moskalik, A., Barba, D., Newman, K., and Dekraker, P.
- "Modeling of a Conventional Mid-Size Car with CVT Using ALPHA and Comparable Powertrain Technologies," SAE Technical Paper 2016-01-1141, 2016, doi:10.4271/2016-01-1141, Newman, K., Doorlag, M., and Barba, D.
- "Modeling the Effects of Transmission Gear Count, Ratio Progression, and Final Drive Ratio on Fuel Economy and Performance Using ALPHA," SAE Technical Paper 2016-01-1143, 2016, doi:10.4271/2016-01-1143, Newman, K. and Dekraker, P.
- "Investigating the Effect of Advanced Automatic Transmissions on Fuel Consumption Using Vehicle Testing and Modeling," SAE Int. J. Engines 9(3):2016, doi:10.4271/2016-01-1142, Moskalik, A., Hula, A., Barba, D., and Kargul, J.
- "Development and Testing of an Automatic Transmission Shift Schedule Algorithm for Vehicle Simulation," SAE Int. J. Engines 8(3):2015, doi:10.4271/2015-01-1142, Newman, K., Kargul, J., and Barba, D.
- "Benchmarking and Modeling of a Conventional Mid-Size Car Using ALPHA," SAE Technical Paper 2015-01-1140, 2015, doi:10.4271/2015-01-1140, Newman, K., Kargul, J., and Barba, D.
Overview of Testing and Integration with Modeling
NCAT has integrated benchmarking and modeling activities to ensure robust data. The following presentation highlights the benchmarking and modeling activities relating to light-duty GHG emissions.
Engine Mapping Process Documents
Integrating Test Data for Light-duty GHG Technology and modeling results for engines into the ALPHA model requires a process for translating test results into a full map representing all phases of engine operation. The following documents explain the process for creating ALPHA engine maps for key engine packages.
- Process for Generating Engine Fuel Consumption Map: Ricardo Baseline Standard Car Engine Tier 2 Fuel
- Process for Generating Engine Fuel Consumption Map: Chevy Malibu 2.5L I4 Engine Using Tier 3 Fuel
- Process for Generating Engine Fuel Consumption Map: Mazda SKYACTIV 2.0L Engine Using Tier 2 Fuel
- Process for Generating Engine Fuel Consumption Map: Ford F150 EcoBoost 2.7L Tier 2 Fuel
- Process for Generating Engine Fuel Consumption Map: Future Atkinson Engine with Cooled EGR and Cylinder Deactivation
- Process for Generating Engine Fuel Consumption Map: Ricardo Cooled EGR Boost 24-bar Standard Car Engine Tier 2 Fuel
- Process for Generating Engine Fuel Consumption Map: Honda Civic L15B7 1.5L Turbo 130kW Engine 91 RON Fuel
- Process for Generating Engine Fuel Consumption Map: Toyota TNGA 2.5L 150kW Atkinson Engine Tier 2 Fuel
ALPHA v1.0
The initial version of ALPHA, used for off-cycle technology evaluations, is provided for historical purposes. The software is a freely-distributed, desktop computer based application, built on MATLAB/Simulink. EPA is no longer using this version of ALPHA.
The downloadable installation file below (in a zip format) contains the ALPHA v1.0 tool. The model documentation provides details on how to launch and run the simulation tool.
- ALPHA User's Guide for Off-Cycle Credit Evaluation v1.0 (PDF)(22 pp, 1.27MB, EPA-420-B-12-051, August 2012)
This document contains descriptions of how to launch and use the ALPHA tool for off-cycle technology evaluation. - ALPHA v1.0 Installation File (ZIP)(1 pg, 203 K)
This file contains the ALPHA v1.0 application files written in MATLAB/Simulink. This version was used in EPA’s Model Year 2017-2025 Final Rulemaking for Light-Duty Vehicle Greenhouse Gas Emission Standards.