Hazardous Waste Cleanup: Sentry Paint Technologies in Darby, Pennsylvania
On this page:
- Cleanup Status
- Site Description
- Contaminants at this Facility
- Institutional/Engineer Controls
- Land Reuse
- Site Responsibility
Cleanup Status
Pennsylvania Department of Environmental Protection (PADEP) visited the facility and met with company representatives on July 31, 2003. EPA is reviewing existing environmental information to determine if further investigation is required. EPA will focus first on the health and groundwater impacts, if any, presented by the facility. Once EPA completes this review process, an environmental indicator determination will be prepared and posted to this website.
Site Description
Interactive map of Sentry Paint Technologies, Darby, PA
The facility is located at 237 Mill Street, Darby, Delaware County, Pennsylvania. The facility manufactured paint, primer, and industrial coatings. All manufacturing operations of the facility were permanently shut down on April 30, 2003. The facility is currently used as distribution center for east coast customers of Sheboygan Paint Company. The facility currently consists of a manufacturing area, a warehouse, a laboratory, and office space.
Contaminants at this Facility
The facility was a large quantity hazardous waste generator (LQG) until 2002.
Institutional and Engineering Controls at this Facility
The need for Institutional Controls is yet to be determined.
Land Reuse Information at this Facility
The site's future use is yet to be determined.
Site Responsibility at this Facility
Resource Conservation and Recovery Act (RCRA) Corrective Action activities at this facility have been conducted under the direction of EPA Region 3.