Hazardous Waste Cleanup: Reilly Finishing Technologies in Nanticoke, Pennsylvania

On this page:


Cleanup Status

There is no contamination in soil or groundwater at the Facility. No further actions are necessary at the Facility. EPA's Final Decision of Corrective Action Complete without controls for the Facility became effective August 14, 2009.

 



 

 
 

Top of Page


Site Description

Interactive Map of Reilly Finishing Technologies, Nanticoke, Pennsylvania


View larger map

The site is comprised of approximately 0.5 acres of land located in Nanticoke, Luzerne County, Pennsylvania. A primarily residential/small industrial area is located immediately north, south, and west of the site. The majority of the site is comprised of a 27,000 square foot building. Reilly is involved in metal finishing, primarily for the aerospace and electronic industries. The major facility operations consist of electroless nickel and zinc plating. A small portion of chrome and copper work is also performed. Methylene chloride and mineral spirits had been used in the manufacturing processes. In 1994, solvents were eliminated from the manufacturing processes.

Top of Page


Contaminants at this Facility

There is no contamination in soil or groundwater at the facility.

Top of Page


Institutional and Engineering Controls at this Facility

Institutional Controls were not required at the facility.

Top of Page


Land Reuse Information at this Facility

The facility is under continued use.

Top of Page


Site Responsibility at this Facility

Resource Conservation and Recovery Act (RCRA) Corrective Action activities at this facility have been conducted under the direction of EPA Region 3.

Top of Page