NALE-IT

TECHNICAL PRODUCT BULLETIN #SW-28
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
LISTING DATE: NOVEMBER 05, 2001
"NALE-IT"

I. NAME, BRAND, OR TRADEMARK
NALE-IT Type of Product: Surface Washing Agent

II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT
SPL Control LLC P.O. Box 627 Elemore City, OK 73433 Phone: (580) 788-2187 Email: splcontorl@aol.com (Mr. Tom Lester)

III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS
SPL Control LLC P.O. Box 627 Elemore City, OK 73433 Phone: (580) 788-2187 Email: splcontorl@aol.com (Mr. Tom Lester)

IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION
1. Flammability: Non-flammable 2. Ventilation: Workers should be in well ventilated areas; if in a confined area, use a respirator. 3. Skin and eye contact; protective clothing; treatment in case of contact: Workers should wear protective goggles or safety glasses. Prolonged contact with skin may result in dryness. 4.a. Maximum storage temperature: NA 4.b. Minimum storage temperature: >32ºF 4.c. Optimum storage temperature range : 40ºF to 200ºF 4.d. Temperatures of phase separations and chemical changes: No phase separation or hazardous polymerization will occur.

IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION

1. Flammability:
Non-flammable
2. Ventilation:
Workers should be in well ventilated areas; if in a confined area, use a respirator.
3. Skin and eye contact; protective clothing; treatment in case of contact:
Workers should wear protective goggles or safety glasses. Prolonged contact with skin may result in dryness.
4.a. Maximum storage temperature: NA
4.b. Minimum storage temperature: >32ºF
4.c. Optimum storage temperature range : 40ºF to 200ºF
4.d. Temperatures of phase separations and chemical changes: No phase separation or hazardous polymerization will occur.

V. SHELF LIFE
Indefinite.

VI. RECOMMENDED APPLICATION PROCEDURE
1. Application Method: NALE-IT may be applied using a pressure sprayer. 2. Concentration/Application Rate: For pit closures, surface hydrocarbon spills, compressor stations, pipeline and flow line leaks, well head and tank farm leaks, and highway spills (petroleum products) mix 1 part NALE-IT with 20 parts water. 3. Conditions for Use: Equally effective with fresh or salt water.

VII. TOXICIY AND EFFECTIVENESS

a. Toxicity:

Material Tested	Species	LC50 (ppm)
NALE-IT	Menidia beryllina Mysidopsis bahia	273.30 96-hr 69.00 48-hr
No. 2 Fuel Oil	Menidia beryllina Mysidopsis bahia	6.93 96-hr 2.29 48-hr
NALE-IT & No. 2 Fuel Oil (1:10)	Menidia beryllina Mysidopsis bahia	3.82 96-hr 1.84 48-hr
Reference Toxicant (SDS)	Menidia beryllina Mysidopsis bahia	2.60 96-hr 8.56 48-hr

b. Effectiveness:
NA

VIII. MICROBIOLOGICAL ANALYSIS
NA

IX. PHYSICAL PROPERTIES
1. Flash Point: >212ºF 2. Pour Point: 30ºF 3. Viscosity: 1.18 4. Specific Gravity: 1.02 5. pH: 6.8 - 7.2 6. Surface Active Agents: CONFIDENTIAL 7. Solvents: None 8. Additives: CONFIDENTIAL 9. Solubility in water: Soluble in fresh and salt water

X. ANALYSIS FOR HEAVY METALS, CYANIDES, AND CHLORINATED HYDROCARBONS

Compound	Concentration (ppm)
Arsenic	0.82
Cadmium	ND
Chromium	ND
Copper	0.173
Lead	ND
Mercury	ND
Nickel	ND
Zinc	0.18
Cyanide	ND
Chlorinated Hydrocarbons	ND

Top of Page