Effluent Guidelines

Ferroalloy Manufacturing Effluent Guidelines

""EPA promulgated the Ferroalloy Manufacturing Effluent Guidelines and Standards (40 CFR Part 424) in 1974 and 1975. The regulation covers directHelpdirect dischargerA point source that discharges pollutants to waters of the United States, such as streams, lakes, or oceans. and indirectHelpindirect dischargerA facility that discharges pollutants to a publicly owned treatment works (municipal sewage treatment plant). dischargers. The Effluent Guidelines and Standards are incorporated into NPDES permits for direct dischargers, and permits or other control mechanisms for indirect dischargers (See Pretreatment Program).

On this page:

What is the Ferroalloy Manufacturing Industry?

Ferroalloy manufacturers add chemical elements to molten iron, usually during steelmaking. The alloys impart distinctive qualities to steel and cast iron or serve important functions during production. Ferroalloys are used for deoxidation, alloying, and graphitization of steel and cast iron. There are four major methods used to produce ferroalloy and high purity metallic additives for steelmaking:
  1. Blast furnace
  2. Electric smelting furnace
  3. Alumina- or silicothermic process
  4. Electrolytic deposition.
The major alloys produced are:
  • Silicon alloys (ferrosilicon and calcium silicide)
  • Chromium alloys (high carbon ferrochromium in various grades and ferrochrome-silicon)
  • Manganese alloys (standard ferromanganese and silicomanganese).
Ferroalloy manufacturing is included within the following NAICS groups:
  • 331111 Iron and Steel Mills
  • 331112 Electrometallurgical Ferroalloy Product Manufacturing

Note: The NAICS listing is provided as a guide and does not define the coverage of the Ferroalloy Manufacturing category. For precise definitions of coverage, see the applicability sections in 40 CFR Part 424.

Wastewater is generated mainly as thermal pollution, and from air pollution control devices (baghouses, wet scrubbers and electrostatic precipitators).

Top of Page

Related Categories

Facilities Covered

The Ferroalloy Manufacturing regulation is organized into 7 subcategories:
  1. Open Electric Furnaces with Wet Air Pollution Control Devices
  2. Covered Electric Furnaces and Other Smelting Operations with Wet Air Pollution Control Devices
  3. Slag Processing
  4. Covered Calcium Carbide Furnaces with Wet Air Pollution Control Devices
  5. Other Calcium Carbide Furnaces
  6. Electrolytic Manganese Products
  7. Electrolytic Chromium

Top of Page

Rulemaking History

1975 Amendment

Subparts D-G
  • Documents, including:
    • Interim Final Rule: 40 FR 8030, 2/24/1975
    • Development Documents
      Industry description, wastewater characterization, treatment technologies, regulatory compliance cost estimates and pollutant loadings for the final rule:
      • Calcium Carbide Segment (EPA 440/1-75/038, February 1975)
      • Electrolytic Ferroalloys Segment (EPA 440/1-75/038a, February 1975)

1974 Initial Rulemaking

Subparts A-C
  • Documents, including:
    • Final Rule: 39 FR 6806, 2/22/1974
    • Development Document – Smelting and Slag Processing Segment (February 1974)
      Industry description, wastewater characterization, treatment technologies, regulatory compliance cost estimates and pollutant loadings for the final rule
    • Proposed Rule: 38 FR 29008, 10/18/1973

Top of Page

Additional Information

For additional information regarding Ferroalloy Manufacturing Effluent Guidelines, please contact Ahmar Siddiqui, siddiqui.ahmar@epa.gov or 202-566-1044.