Effluent Guidelines

Centralized Waste Treatment Effluent Guidelines

Rule Summary

Rule Summary

EPA promulgated the Centralized Waste Treatment (CWT) Effluent Guidelines and Standards (40 CFR Part 437) in 2000 and amended the rule in 2003. The regulations cover discharges from facilities that treat or recover metal-bearing, oily, and organic wastes, wastewater, or used material received from off-site. The CWT Effluent Guidelines and Standards are incorporated into NPDES permits for direct dischargers, and permits or other control mechanisms for indirect dischargers (see Pretreatment Program).

On this page:

What is Centralized Waste Treatment?
Facilities Covered
Compliance Assistance
Study of CWT and Oil & Gas Wastewater – 2014-17
Rulemaking History
Additional Information

What is Centralized Waste Treatment?

The centralized waste treatment industry handles wastewater treatment residuals and industrial process by-products that come from other industries. CWT facilities receive a wide variety of hazardous and non-hazardous industrial wastes for treatment. Many of the wastes contain very high pollutant concentrations and are unusually difficult to treat.

CWT facilities typically fall within NAICS codes 562211 (hazardous waste treatment and disposal), 562219 (other nonhazardous waste treatment and disposal) and 562920 (materials recovery facilities).

Top of Page

Facilities Covered

The CWT Effluent Guidelines apply to facilities in four subcategories:

Metals Treatment and Recovery

Oils Treatment and Recovery

Organics Treatment and Recovery

Multiple Wastestreams

Examples of discharges covered by the regulation:

Discharges from stand-alone waste treatment and recovery facilities receiving materials from off site. These facilities may treat hazardous or non-hazardous waste, hazardous or non-hazardous wastewater, and/or used material from off site, for disposal, recycling or recovery.
Certain discharges from waste treatment systems at facilities primarily engaged in other industrial operations. Thus, industrial facilities which process their own, on-site generated, process wastewater with hazardous or non-hazardous wastes, wastewaters, and/or used material received from off site, in certain circumstances, may be subject to this category with respect to a portion of their discharge.

Covered wastestreams include materials received from off-site, solubilization water, used oil/emulsion breaking wastewater, tanker truck/drum/roll-off box washes, equipment washes, air pollution control waters, laboratory-derived wastewater, wastewater from on-site industrial waste combustors, landfills, and contaminated stormwater.

The CWT category does not apply to:

operations at facilities which are subject to other effluent guidelines categories and which receive wastes from off-site for treatment or recovery that are subject to the same effluent guidelines as the on-site generated wastes
operations at facilities which receive off-site wastes whose nature and treatment are compatible with the treatment of on-site non-CWT wastes
operations engaged exclusively in landfilling and/or the treatment of landfill wastewaters, whether generated on- or off-site (See also the Landfills Effluent Guidelines, 40 CFR Part 445)

Facilities that treat wastewater that results from cleaning tanker trucks, rail tank cars, or barges may be subject to the CWT effluent guidelines if not subject to the Transportation Equipment Cleaning Effluent Guidelines (40 CFR Part 442).

See the applicability and definitions sections in 40 CFR Part 437 for complete descriptions of coverage and exclusions.

Top of Page

Compliance Assistance

Small Entity Compliance Guide (2001)
A plain language explanation of how to comply with the CWT regulation; with Frequently Asked Questions (2003 and 2006)

Top of Page

Study of CWT and Oil & Gas Wastewater – 2014-17

EPA is conducting a study of CWT facilities accepting oil and gas extraction wastewater. EPA solicits data and information related to the extent to which CWT facilities accept such wastewater, available treatment technologies (and their associated costs), discharge characteristics, financial characteristics of CWT facilities, the environmental impacts of discharges from CWT facilities, as well as any other information believed to be relevant to EPA’s study of this issue.

Top of Page

You will need Adobe Reader to view some of the files on this page. See EPA’s About PDF page to learn more.

Rulemaking History

2003 Amendment
Deleted limitations for several pollutants; revision to BOD limitation.
- Final Rule - Federal Register Notice (December 22, 2003)
  - Fact Sheet
- Proposed rule - Federal Register Notice (September 10, 2003)
2000 Initial Rulemaking
- Final rule - Federal Register Notice (December 22, 2000)
  - Support documents, including:
    - Fact sheet
    - Development Document
      Describes industry processes, pollutants generated, available control & treatment technologies, the technical basis for the final rule, and costs of the rule
    - Environmental Assessment
      Evaluates environmental effects, human health impacts and impacts on publicly owned treatment works from wastewater discharges by CWT facilities, and estimates the benefits associated with the final rule
- Proposed Rule - Federal Register Notice (January 13, 1999)

Top of Page

Additional Information

For additional information regarding the CWT Effluent Guidelines, please contact Jesse Pritts (pritts.jesse@epa.gov) or 202-566-1038.

Top of Page