Drinking Water Regulations and Contaminants
On this page:
- National primary drinking water regulations (NPDWRs)
- List of drinking water contaminants and their maximum contaminant levels (MCLs)
- National secondary drinking water regulations (NSDWRs)
- List of secondary drinking water regulations
- Unregulated drinking water contaminants
National Primary Drinking Water Regulations (NPDWRs)
NPDWRs (or primary standards) are legally enforceable standards that apply to public water systems.
Primary standards protect public health by limiting the levels of contaminants in drinking water.
- Regulation Timeline: Contaminants Regulated Under the Safe Drinking Water Act
- Visit the Code of Federal Regulations for more information about NPDWRs
List of primary drinking water contaminants and their maximum contaminant levels (MCLs)
- Fact sheets on the primary drinking water regulations
- Table of Regulated Drinking Water Contaminants
National secondary drinking water regulations (NSDWRs)
NSDWRs (or secondary standards) are non-enforceable guidelines regulating contaminants that may cause cosmetic effects (such as skin or tooth discoloration) or aesthetic effects (such as taste, odor, or color) in drinking water. EPA recommends secondary standards to water systems but does not require systems to comply. However, states may choose to adopt them as enforceable standards.
|Aluminum||0.05 to 0.2 mg/L|
|Color||15 (color units)|
|Foaming Agents||0.5 mg/L|
|Odor||3 threshold odor number|
|Total Dissolved Solids||500 mg/L|
Unregulated drinking water contaminants
This list of contaminants which, at the time of publication, are not subject to any proposed or promulgated national primary drinking water regulation (NPDWRs), are known or anticipated to occur in public water systems, and may require regulations under the Safe Drinking Water Act (SDWA).
For more information visit the Drinking Water Contaminant Candidate List (CCL) and Regulatory Determination Website.