PFOA Stewardship Program Baseline Year Summary Report
- Background
- Contents, Definitions in Table 1 and Table 2
- Table 1 - U.S. Operations
- Table 2 - Non - U.S. Operations
Background
As part of their commitment to the 2010/15 PFOA Stewardship Program, the eight participating companies agreed to submit baseline data on their facility emissions and product content of PFOA and related chemicals by October 31, 2006. Progress toward the goals of the program, including a 95 percent reduction in emissions and product content by 2010, will be measured against these baseline data.
EPA has summarized the baseline data submitted by all the participating companies in their public reports in the two tables that appear below. Additional information may be obtained by viewing the specific company reports in the docket EPA-HQ-OPPT-2006-0621.
As a means of measuring reductions, the PFOA Stewardship Program Reporting Guidance suggested that individual companies use year 2000 data as the baseline for their company's emissions and product content information. Companies that did not have year 2000 data available were to use as a baseline the nearest year for which data were available. Read the PFOA Guidance document. In addition, to account for all of their operations or products, some companies used more than a single baseline year. Please note that these tables present baseline year figures, not a report of current conditions. Download the Baseline Summary Tables.
Accompanying their baseline data submissions, two companies, 3M/Dyneon and DuPont, also submitted information on the reductions in emissions and product content that they have already achieved. Both of these submissions can be found in docket EPA-HQ-OPPT-2006-0621 as documents EPA-HQ-OPPT-2006-0621-0022 and EPA-HQ-OPPT-2006-0621-0019, respectively.
Contents of Table 1 and Table 2
In the Stewardship Program, companies were requested to provide data on both their United States and global operations. Table 1 contains data for manufacturing sites in the United States, and for products manufactured in the United States. Table 2 contains data for manufacturing sites located outside the United States, and for products that are manufactured outside the United States.
Table 1 - U.S. Operations
Company | Baseline Year | Chemical Category | Emissions | Product Content | |||
---|---|---|---|---|---|---|---|
Releases to all media from FP and Telomer manufacturing (kg) | kg of release / kg of product produced | Dispersions (ppm wet-weight basis) | Other Fluoropolymers (ppm dry-weight basis) | Telomers (ppm dry-weight basis, unless stated otherwise) | |||
Arkema
|
1999
|
PFOA and Higher Homologues
|
›10,000-100,000 |
For FP Production:
(›0.1-1) kg/100 kg |
›500-1,000
|
›70-150
|
Not Applicable
|
Precursors
|
Not Applicable | ||||||
Asahi
|
2000
|
PFOA and Higher Homologues
|
5,230
|
For FP Production:
<1 kg / 100 kg |
1,364
|
CBI
|
Not Applicable
|
Precursors
|
Not Applicable | ||||||
Ciba
|
2002
|
PFOA
|
30 kg
(total for emissions and product content) |
||||
Higher Homologues
|
27 kg
(total for emissions and product content) |
||||||
Precursors
|
‹6 kg
(total for emissions and product content) |
||||||
Clariant
|
2005
|
Not Applicable
|
|||||
Daikin
|
2000
|
PFOA
|
CBI
|
For FP Production:
0.14 kg / 100 kg |
420
|
14
|
1
(wet-weight basis) |
For Telomer Production:
8.4E-6 kg / 100 kg |
|||||||
Precursors and Higher Homologues
|
CBI
|
For Telomer Production:
0.034 kg / 100 kg |
Not Applicable
|
Not Applicable
|
11,000
(wet-weight basis) |
||
DuPont
|
2000,
2003*, 2004** |
PFOA
|
49,400
|
Not Reported
|
970*
|
340
|
496 kg (global total product content in all product produced)** Direct precursors are C8 Telomer A iodide and the 8-2-8 Telomer B alcohol ester of PFOA
|
Precursors
|
CBI
|
CBI
|
Not Applicable
|
Not Applicable
|
65 kg (global total product content in all product produced)**
|
||
3M/Dyneon
|
1999
|
PFOA
|
1,700
|
For FP Production:
1 - 10 kg / 100 kg |
4,300
|
Not Reported
|
Not Applicable
|
Solvay Solexis
|
2000
|
PFOA and PFOA Salts
|
1000 - 10,000
|
For FP Production:
0.1 - 1 kg/100 kg |
1,500 - 1,700 (for PFOA, its Salts, and Higher Homologues)
|
140 - 170 (for PFOA, its Salts, and Higher Homologues)
|
Not Applicable
|
Higher Homologues
|
1000 - 10,000
|
For FP Production:
0.1 - 1 kg/100 kg |
|||||
Precursors
|
Not Applicable
|
0
|
0
|
0
|
*, **: In the DuPont report, different baseline years were used for certain product lines. Figures marked with asterisks (*, **)
correspond to the baseline years identified with matching asterisks in the second column.
"Not Applicable" indicates that the data element did not apply to the specific company's operations in the area covered by the table.
"Not Reported" indicates that the company did not provide a figure for the specific data element.
Table 2 - Non - U.S. Operations
Company | Baseline Year | Chemical Category | Emissions | Product Content | |||
---|---|---|---|---|---|---|---|
Releases to all media from FP and Telomer manufacturing (kg) | kg of release / kg of product produced | Dispersions (ppm wet-weight basis) | Other Fluoropolymers (ppm dry-weight basis) | Telomers (ppm dry-weight basis, unless stated otherwise) | |||
Arkema
|
1999
|
PFOA and Higher Homologues
|
›1,000-10,000
|
For FP Production:
(>0.1-1) kg/100 kg |
Not Applicable
|
›70-150
|
Not Applicable
|
Precursors | Not Applicable | ||||||
Asahi
|
1999,
2000, 2004 |
PFOA and Higher Homologues
|
9,865
|
For FP Production:
<1 kg/100 kg |
1,800
|
CBI
|
Negligible compared to precursors
|
Precursors
|
3,954
|
For Telomer Production:
<1 kg/100 kg |
Not Applicable
|
Not Applicable
|
Average: 50% (range: 0-100%)
|
||
Ciba
|
2002
|
PFOA
|
456 kg (total for emissions and product content)
|
||||
Higher Homologues
|
438 kg (total for emissions and product content)
|
||||||
Precursors
|
378 kg (total for emissions and product content)
|
||||||
Clariant
|
2005
|
PFOA |
< 10
|
For Telomer Production:
< ( 2.5E-4 kg / 100 kg ) |
Not Applicable
|
Not Applicable
|
< 5
(total product content) |
Direct Precursors
|
< 5
|
For Telomer Production:
< ( 1.25E-4 kg / 100 kg ) |
Not Applicable
|
Not Applicable
|
< 100
(total product content) |
||
Daikin
|
2000
|
PFOA
|
CBI
|
For FP Production:
0.27 kg/100 kg |
2000
|
140
|
0.99 (wet-weight basis)
|
For Telomer Production: 8.4E-6 kg/100 kg
|
|||||||
Precursors and Higher Homologues
|
CBI
|
For Telomer Production: 0.034 kg/100 kg
|
Not Applicable
|
Not Applicable
|
10,000 (wet-weight basis)
|
||
DuPont
|
2000,
2003*, 2004** |
PFOA
|
19,500
|
Not Reported
|
1,040*
|
300
|
496 kg (global total product content in all product produced)** Direct precursors are C8 Telomer A iodide and the 8-2-8 Telomer B alcohol ester of PFOA
|
Precursors
|
CBI
|
CBI
|
Not Applicable
|
Not Applicable
|
65 kg (global total product content in all product produced)**
|
||
3M/Dyneon
|
2000
|
PFOA
|
14,400
|
For FP Production:
<1 kg/100 kg |
1,600
|
Not Reported |
Not Applicable
|
Solvay Solexis
|
Not Applicable
|
*, **: In the DuPont report, different baseline years were used for certain product lines. Figures marked with asterisks (*, **)
correspond to the baseline years identified with matching asterisks in the second column.
"Not Applicable" indicates that the data element did not apply to the specific company's operations in the area covered by the table.
"Not Reported" indicates that the company did not provide a figure for the specific data element.